RESULTS - EXE DYNO DAY

Cruises, Meeting's and State Specific Information

Moderators: IMC, Club Staff

Post Reply
User avatar
flameboy
Newbie
Newbie
Posts: 15
jedwabna poszewka promocja
Joined: Wed May 24, 2006 5:00 pm

RESULTS - EXE DYNO DAY

Post by flameboy »

EXE DYNO DAY RESULT

TPJ - FWD - Integra VtiR - 95.1 KW
Image

quiee - FWD - DC2 - 112.7 KW
Image

icegroove - FWD - DC2 - 114.4 KW
Image

doddsy - AWD - MPS6 - 120.1 KW
Image

KTHL FWD SP20 ATX - 75.5 KW
Image

takahasi - RWD - RX8 - invalid
ImageImage

Sheepo - FWD - Mazda3 SP23 - 94.6 KW
Image

Sandy - FWD - Mazda3 SP23 - 99.8 KW
Image

Vman - FWD - Mazda3 SP23 - 102.8 KW
Image

Flameboy - FWD - Mazda3 SP23 - 109.7 KW
Image

Unco - FWD - Mazda3 maxx sport - 92.1 KW
Image

awhar3 - FWD - Mazda3 maxx sport ATX - 83.3 KW
Image

silver slug - FWD - Corolla - 115.5 KW
Image

arthurr - RWD - 180SX - 126.1 KW
Image

robzilla - RWD - TRX - 166.6 KW
Image

myredzed - RWD - 300ZX - 218.1 KW
Image

Kuning - RWD - s6 RX7 - 141.3 KW
Image

eric - RWD - RX7 - 194.8 KW
Image

limpus - RWD - R32 - 155.4 KW
Image

PAV34 - RWD - R34 - 168.7 KW
Image

Tim - AWD - 323 T - 111 KW
Image

MX6mad - FWD - MX6 - 75.1 KW
Image

TAAXED - RWD - S2000 - 136.5 KW
Image

aaron - FWD - MX6 T - 98.2 KW
Image

zorb_rules - FWD - TX5 T - 102.0 KW
Image

jesiotrot - FWD - TX5 T - 96.4 KW
Image

max - FWD - FTO - 100.6 KW
Image

Mid_Nite_R33 - RWD - gtst - 153.4 KW
Image

jimjim - RWD - S15 - 174.7 KW
Image

sleepingdragon - RWD - 180SX - 195.6 KW
Image

joksol RWD S14 - 166.7 KW
Image

tony RWD VS commodore - 121 KW
Image

JMG RWD R33 - 148 KW
Image

anthony RWD ford excort - 130.7 KW
Image

matt S14a (12.9 sec @ 107mph) RWD - 171.2 KW
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Nice Max! Cracked the ton :wink:

Beware the orange mk 2 esky thou! 8O 130 at the rear in 800kgs!
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Max what sort of gear u running at the moment & is that on 3rd?
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

lol at the SP3 with 109! omg and the Corolla with a good 115!
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Hey don't laugh at a Rolla Chris, i brought one to one of the cruise before & it kept up with all of ya hehehe

But from the photo, the rolla looks like got an aftermarket extractor. So i assume its got a bit of work done to it. But even a stock one (Sportival) will give a FTO a good run for the money.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
mxysxy
Oldtimer
Posts: 1905
Joined: Wed Aug 18, 2004 5:00 pm
Location: Melbourne
Contact:

Post by mxysxy »

Bennoz wrote:Nice Max! Cracked the ton :wink:
thanks Ben, really wanted to be over 100kws
FTO338 wrote:Max what sort of gear u running at the moment & is that on 3rd?
nothing too sophisticated really, only the CAI and the extractors to the cat, ohh and weekly meet and veggy shopping in the boot from the Preston market.
My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,

And will be getting the cat back and FPR in late September.

Then back to the same dyno I guess.

I will scan the graph tomorrow and post it here, I need you guys view on it.

PS: I did mention few times to run the car in 3rd gear, but it says 4th on the graph, not sure though, they might have used 3rd

Thanks to flameboy, it was a good introduction for me to the dyno, he broke my cherry.
dimi
Mechanic
Posts: 403
Joined: Thu Jan 27, 2005 6:00 pm

Post by dimi »

Love what u have done to your headlights and fog lights mate look awesome, how much did that set u back, also is it really as bigger bitch as everyone says it is, the heating of the plastic without f**kng them up.

Cheers
mxysxy
Oldtimer
Posts: 1905
Joined: Wed Aug 18, 2004 5:00 pm
Location: Melbourne
Contact:

Post by mxysxy »

dimi wrote:Love what u have done to your headlights and fog lights mate look awesome, how much did that set u back, also is it really as bigger bitch as everyone says it is, the heating of the plastic without f**kng them up.
Cheers
All i can say regarding to cost is that;
- The car has fully resprayed dual pac, except the engine bay. No masking, every single part/panel has taken out, back to shell pretty much
- All the removable interior has been resprayed proffessionally to the same colour as the car, dual pac
- New front bumper, clear side indicators
- Headlights and foglights internally sprayed
- Boot key hole, aerial hole, all the stitckers, FTO embossed logo at the back bumper, window rain shield, etc.. all removed
- There are few other things done which I cant remember

The final bill was huge, very close to turboing the car!!!

And yes, headlights are really hard to do, taking them off is a real pain, putting them back on even harder.
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
yo mAx...get it done at centreline suspension in thomastown. They will fix that up properly and also fix eevrything else for u...now they have worked on my car they will know what to do with urs...

KJ
mxysxy
Oldtimer
Posts: 1905
Joined: Wed Aug 18, 2004 5:00 pm
Location: Melbourne
Contact:

Post by mxysxy »

khunjeng wrote:
My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
yo mAx...get it done at centreline suspension in thomastown. They will fix that up properly and also fix eevrything else for u...now they have worked on my car they will know what to do with urs...

KJ
will give them a call soon
thanks
User avatar
khunjeng
Oldtimer
Posts: 4455
Joined: Mon Oct 24, 2005 5:00 pm
Location: Melbourne, Victoria

Post by khunjeng »

if u do...say your mate with the black fto recomended you...the main guys name is Chris also. If you go there you will see they do a lot of racing cars and they support a private V8 supercar team...that car is usually there..
shue
Oldtimer
Posts: 1347
Joined: Mon Mar 07, 2005 6:00 pm
Location: 1000 posts n still whoring

Post by shue »

The final bill was huge, very close to turboing the car!!!
hehe bet it was worth it. :wink:
<div><strong>My Car for Sale - Contact Me</strong></div><br>
mxysxy
Oldtimer
Posts: 1905
Joined: Wed Aug 18, 2004 5:00 pm
Location: Melbourne
Contact:

Post by mxysxy »

shue wrote:
The final bill was huge, very close to turboing the car!!!
hehe bet it was worth it. :wink:
very happy with the final result,
I am paranoid at the moment, cant feel right leaving the car on the street,
only using gf's car these days,
need to calm down I guess
User avatar
Nacho
Oldtimer
Posts: 2087
Joined: Mon Jul 11, 2005 5:00 pm
Location: Melbourne

Post by Nacho »

You've got every right to be paranoid though. Let us know and we'll keep a lookout for that Lancer driver for you. :wink:
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

mxysxy wrote: very happy with the final result,
I am paranoid at the moment, cant feel right leaving the car on the street,
only using gf's car these days,
need to calm down I guess
hahaahah i know what u mean bro, i feel the same everytime i parked on a street which i've never done before & thats why i try to keep my car external stock as possible, less chance of ppl snoop out whats inside it.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
flameboy
Newbie
Newbie
Posts: 15
Joined: Wed May 24, 2006 5:00 pm

Post by flameboy »

mxysxy wrote:
Bennoz wrote:Nice Max! Cracked the ton :wink:
thanks Ben, really wanted to be over 100kws
FTO338 wrote:Max what sort of gear u running at the moment & is that on 3rd?
nothing too sophisticated really, only the CAI and the extractors to the cat, ohh and weekly meet and veggy shopping in the boot from the Preston market.
My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,

And will be getting the cat back and FPR in late September.

Then back to the same dyno I guess.

I will scan the graph tomorrow and post it here, I need you guys view on it.

PS: I did mention few times to run the car in 3rd gear, but it says 4th on the graph, not sure though, they might have used 3rd

Thanks to flameboy, it was a good introduction for me to the dyno, he broke my cherry.
hi max...

no worries mate... anytime... anyway... i called protek today and they said, they put it in the 3rd.... and he forgot to put 3rd instead of forth on the graph detail.... coz even my mate's mps... dynoed with 5th... still said 4th on the graph... so i suspect they put 4th on the graph for all the cars...
Post Reply