RESULTS - EXE DYNO DAY
Moderators: IMC, Club Staff
- flameboy
- Newbie
- Posts: 15
- jedwabna poszewka promocja
- Joined: Wed May 24, 2006 5:00 pm
RESULTS - EXE DYNO DAY
EXE DYNO DAY RESULT
TPJ - FWD - Integra VtiR - 95.1 KW
quiee - FWD - DC2 - 112.7 KW
icegroove - FWD - DC2 - 114.4 KW
doddsy - AWD - MPS6 - 120.1 KW
KTHL FWD SP20 ATX - 75.5 KW
takahasi - RWD - RX8 - invalid
Sheepo - FWD - Mazda3 SP23 - 94.6 KW
Sandy - FWD - Mazda3 SP23 - 99.8 KW
Vman - FWD - Mazda3 SP23 - 102.8 KW
Flameboy - FWD - Mazda3 SP23 - 109.7 KW
Unco - FWD - Mazda3 maxx sport - 92.1 KW
awhar3 - FWD - Mazda3 maxx sport ATX - 83.3 KW
silver slug - FWD - Corolla - 115.5 KW
arthurr - RWD - 180SX - 126.1 KW
robzilla - RWD - TRX - 166.6 KW
myredzed - RWD - 300ZX - 218.1 KW
Kuning - RWD - s6 RX7 - 141.3 KW
eric - RWD - RX7 - 194.8 KW
limpus - RWD - R32 - 155.4 KW
PAV34 - RWD - R34 - 168.7 KW
Tim - AWD - 323 T - 111 KW
MX6mad - FWD - MX6 - 75.1 KW
TAAXED - RWD - S2000 - 136.5 KW
aaron - FWD - MX6 T - 98.2 KW
zorb_rules - FWD - TX5 T - 102.0 KW
jesiotrot - FWD - TX5 T - 96.4 KW
max - FWD - FTO - 100.6 KW
Mid_Nite_R33 - RWD - gtst - 153.4 KW
jimjim - RWD - S15 - 174.7 KW
sleepingdragon - RWD - 180SX - 195.6 KW
joksol RWD S14 - 166.7 KW
tony RWD VS commodore - 121 KW
JMG RWD R33 - 148 KW
anthony RWD ford excort - 130.7 KW
matt S14a (12.9 sec @ 107mph) RWD - 171.2 KW
TPJ - FWD - Integra VtiR - 95.1 KW
quiee - FWD - DC2 - 112.7 KW
icegroove - FWD - DC2 - 114.4 KW
doddsy - AWD - MPS6 - 120.1 KW
KTHL FWD SP20 ATX - 75.5 KW
takahasi - RWD - RX8 - invalid
Sheepo - FWD - Mazda3 SP23 - 94.6 KW
Sandy - FWD - Mazda3 SP23 - 99.8 KW
Vman - FWD - Mazda3 SP23 - 102.8 KW
Flameboy - FWD - Mazda3 SP23 - 109.7 KW
Unco - FWD - Mazda3 maxx sport - 92.1 KW
awhar3 - FWD - Mazda3 maxx sport ATX - 83.3 KW
silver slug - FWD - Corolla - 115.5 KW
arthurr - RWD - 180SX - 126.1 KW
robzilla - RWD - TRX - 166.6 KW
myredzed - RWD - 300ZX - 218.1 KW
Kuning - RWD - s6 RX7 - 141.3 KW
eric - RWD - RX7 - 194.8 KW
limpus - RWD - R32 - 155.4 KW
PAV34 - RWD - R34 - 168.7 KW
Tim - AWD - 323 T - 111 KW
MX6mad - FWD - MX6 - 75.1 KW
TAAXED - RWD - S2000 - 136.5 KW
aaron - FWD - MX6 T - 98.2 KW
zorb_rules - FWD - TX5 T - 102.0 KW
jesiotrot - FWD - TX5 T - 96.4 KW
max - FWD - FTO - 100.6 KW
Mid_Nite_R33 - RWD - gtst - 153.4 KW
jimjim - RWD - S15 - 174.7 KW
sleepingdragon - RWD - 180SX - 195.6 KW
joksol RWD S14 - 166.7 KW
tony RWD VS commodore - 121 KW
JMG RWD R33 - 148 KW
anthony RWD ford excort - 130.7 KW
matt S14a (12.9 sec @ 107mph) RWD - 171.2 KW
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Hey don't laugh at a Rolla Chris, i brought one to one of the cruise before & it kept up with all of ya hehehe
But from the photo, the rolla looks like got an aftermarket extractor. So i assume its got a bit of work done to it. But even a stock one (Sportival) will give a FTO a good run for the money.
But from the photo, the rolla looks like got an aftermarket extractor. So i assume its got a bit of work done to it. But even a stock one (Sportival) will give a FTO a good run for the money.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
thanks Ben, really wanted to be over 100kwsBennoz wrote:Nice Max! Cracked the ton
nothing too sophisticated really, only the CAI and the extractors to the cat, ohh and weekly meet and veggy shopping in the boot from the Preston market.FTO338 wrote:Max what sort of gear u running at the moment & is that on 3rd?
My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
And will be getting the cat back and FPR in late September.
Then back to the same dyno I guess.
I will scan the graph tomorrow and post it here, I need you guys view on it.
PS: I did mention few times to run the car in 3rd gear, but it says 4th on the graph, not sure though, they might have used 3rd
Thanks to flameboy, it was a good introduction for me to the dyno, he broke my cherry.
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
All i can say regarding to cost is that;dimi wrote:Love what u have done to your headlights and fog lights mate look awesome, how much did that set u back, also is it really as bigger bitch as everyone says it is, the heating of the plastic without f**kng them up.
Cheers
- The car has fully resprayed dual pac, except the engine bay. No masking, every single part/panel has taken out, back to shell pretty much
- All the removable interior has been resprayed proffessionally to the same colour as the car, dual pac
- New front bumper, clear side indicators
- Headlights and foglights internally sprayed
- Boot key hole, aerial hole, all the stitckers, FTO embossed logo at the back bumper, window rain shield, etc.. all removed
- There are few other things done which I cant remember
The final bill was huge, very close to turboing the car!!!
And yes, headlights are really hard to do, taking them off is a real pain, putting them back on even harder.
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
yo mAx...get it done at centreline suspension in thomastown. They will fix that up properly and also fix eevrything else for u...now they have worked on my car they will know what to do with urs...My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
KJ
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
will give them a call soonkhunjeng wrote:yo mAx...get it done at centreline suspension in thomastown. They will fix that up properly and also fix eevrything else for u...now they have worked on my car they will know what to do with urs...My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
KJ
thanks
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
- FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
hahaahah i know what u mean bro, i feel the same everytime i parked on a street which i've never done before & thats why i try to keep my car external stock as possible, less chance of ppl snoop out whats inside it.mxysxy wrote: very happy with the final result,
I am paranoid at the moment, cant feel right leaving the car on the street,
only using gf's car these days,
need to calm down I guess
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
- flameboy
- Newbie
- Posts: 15
- Joined: Wed May 24, 2006 5:00 pm
hi max...mxysxy wrote:thanks Ben, really wanted to be over 100kwsBennoz wrote:Nice Max! Cracked the ton
nothing too sophisticated really, only the CAI and the extractors to the cat, ohh and weekly meet and veggy shopping in the boot from the Preston market.FTO338 wrote:Max what sort of gear u running at the moment & is that on 3rd?
My concern was that I need to put the new suspension in asap, current one is realy old and spungy, not delivering the power fully I believe. I have to fix this asap, shockers are in my garage waiting to go in,
And will be getting the cat back and FPR in late September.
Then back to the same dyno I guess.
I will scan the graph tomorrow and post it here, I need you guys view on it.
PS: I did mention few times to run the car in 3rd gear, but it says 4th on the graph, not sure though, they might have used 3rd
Thanks to flameboy, it was a good introduction for me to the dyno, he broke my cherry.
no worries mate... anytime... anyway... i called protek today and they said, they put it in the 3rd.... and he forgot to put 3rd instead of forth on the graph detail.... coz even my mate's mps... dynoed with 5th... still said 4th on the graph... so i suspect they put 4th on the graph for all the cars...