Anyone with CAPS able to help me please ?

Delvance · Post by **Delvance** » Fri Apr 27, 2007 12:48 pm

Heya,

Anyone with the CAPS program able to get some part numbers for me please ? I need the part #'s for the 4 cam seals (i'm guessing they're the same?), idle bearing and tensioner bearing, and also the crank seals. It's a gpx if it matters, pretty please ? Lol.

Cheers.

mr-charisma · Post by **mr-charisma** » Fri Apr 27, 2007 8:38 pm

Here are the part numbers from CAPS, I can Post up pics if you require them to be sure about thingsNote: The Cam Seals aren't the same

03130 - OIL SEAL, CAMSHAFT
01221 - SEAL, CYLINDER HEAD CAMSHAFT END

03070 - OIL SEAL, CRANKSHAFT, FR
03080 - OIL SEAL, CRANKSHAFT, RR
03017A - CASE ASSY, CRANKSHAFT, RR OIL SEAL

I'll get back to you on the Idle Bearings & Tensioner bearings.... They're for the belts right? CAM & Timing or something?

Delvance · Post by **Delvance** » Fri Apr 27, 2007 8:44 pm

Thanks heaps mr-charisma

Yep the two bearings are for the timing belt. Basically anything that moves along with the timing belt, i want to replace when major service comes around (soonish).

Thanks once again!

mr-charisma · Post by **mr-charisma** » Fri Apr 27, 2007 9:32 pm

I can't find the bearings :S Might be in the section that I'm having errors opening... Can Anyone else with CAPS see if they can find these parts?

SchumieFan · Post by **SchumieFan** » Sat Apr 28, 2007 6:13 pm

Delvance wrote: Basically anything that moves along with the timing belt, i want to replace when major service comes around (soonish).

um... why?

Delvance · Post by **Delvance** » Sun Apr 29, 2007 10:21 am

So there's a less chance of bearings or water pumps seizing up etc. I'll change the bearings too if they're not too expensive, if they are then i guess i'll just leave them.