both are not working.
the 1st spun a crankshaft bearing.
and the second 1 a piston grabbed and has stuck.
i am stipping the 1st engine and will consider stripping the other, so if you need any engine parts let me know
just took the cams out also have a fuel rail, 2 intake manifols ect. even 2 mivec covers.
2 gpx engines
Moderators: IMC, Club Staff
-
Sugar
- Mechanic
- Posts: 532
- jedwabna poszewka promocja
- Joined: Fri Feb 04, 2005 6:00 pm
- Location: Western Sydney
- Contact:
-
Ralph_Shang
- Apprentice
- Posts: 55
- Joined: Wed Aug 01, 2007 5:00 pm
-
BorepYano
- Forum Moderator
- Posts: 4609
- Joined: Sat Aug 12, 2006 5:00 pm
- Location: Brisbane
noisy tappets?Ralph_Shang wrote:can you fix a engine?
my car engine has lifter noise, can u fix it up with your engine part?
do a search on the forum for it, u should find lots of info and i think a DIY as well for it.
it's apparently a very common FTO problem
kiz wrote:There's potential for a thread about anything on FTO AustraliasilverGPX wrote:This requires a thread? lol
-
nicholas
- Veteran Mechanic
- Posts: 1091
- Joined: Thu May 17, 2007 5:00 pm
- Location: Hills, NSW
I was asking OverBoosting about a Ignition Failure Sensor, but he's taking a fair while to get back to me.
Can you confirm that the IFS was okay in either of the engines, and can I buy it
PS. If you don't know where to find it - it's got a 4 wire plug and is located behind the radiator filler cap (looking from the front of the engine).
Can you confirm that the IFS was okay in either of the engines, and can I buy it
PS. If you don't know where to find it - it's got a 4 wire plug and is located behind the radiator filler cap (looking from the front of the engine).