hi, im now in desperate need of a new speedo cluster, was fidling around with the cluster (puttin new blue lights in behind them) and i must have applied too much voltage to test, apparently my 12v transformer is putting out 20 volt instead,, so now my odometer illuminates with no numbers and the speedo starts at about 150ks at start off,,, now i know there are things to get around the speedo, like take off the needle and put it back to 0kph, but my rpm meter has gone aswel (most likely ignition failure sensor), so i would rather just get a new 1 instead of fixing the 3 problems
the odometer bit is important though, i dont know how to get around that,
so i need a cluster with 91-92000ks, (give or take, i would like it within 7,000ks either side of it)
thanks guys
speedo cluster (or just the speed kph part anyway)
Moderators: IMC, Club Staff
- millsy
- Grease Monkey
- Posts: 128
- jedwabna poszewka promocja
- Joined: Fri Sep 04, 2009 5:00 pm
- Location: geelong
- Contact:
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: speedo cluster (or just the speed kph part anyway)
Youll be lucky getting one that low. I have some clusters, but they are all over 100K
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you

If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: speedo cluster (or just the speed kph part anyway)
You could aways steel Kaz's one as it would only have about 34'000K's on it 

- millsy
- Grease Monkey
- Posts: 128
- Joined: Fri Sep 04, 2009 5:00 pm
- Location: geelong
- Contact:
Re: speedo cluster (or just the speed kph part anyway)
okay, getting desperate now, anyone got any within even 20,000ks? im sick of using my gps,cant keep up with the fto and my rpm gauge has never worked so i have no idea when to change gears in manual mode (tip), anyone with anything? il just hunt out the perfect odo another time but need speedo atleast,
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: speedo cluster (or just the speed kph part anyway)
Yep, I can help. Are you just after the speedo, or the whole cluster. PM me
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you

If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- millsy
- Grease Monkey
- Posts: 128
- Joined: Fri Sep 04, 2009 5:00 pm
- Location: geelong
- Contact:
Re: speedo cluster (or just the speed kph part anyway)
PM'ed dstocks. thanks for your help