WTB parts
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 79
- jedwabna poszewka promocja
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
WTB parts
WAnt to buy
Face lift or VERsion R bumper
LSD KIT of 95 manual (after a check with Mitsubishi confirmed that mine is a 95 not 98....)
Pair of Standard Head lamps
PAir of preface lift fog lamps.
Turbo kit Complete
Face lift or VERsion R bumper
LSD KIT of 95 manual (after a check with Mitsubishi confirmed that mine is a 95 not 98....)
Pair of Standard Head lamps
PAir of preface lift fog lamps.
Turbo kit Complete
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WTB parts
Would a TS Factory facelift suffice..... Its the one on my car (and a good number of the other club members as well):
If so, ive recently had a spare made. Just need to pick it up.
Think I can help with both the headlamps and fog lamps as well
If so, ive recently had a spare made. Just need to pick it up.
Think I can help with both the headlamps and fog lamps as well
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
i love the intake view but not so sure about the bottom piece and sides to be honest,
was talking to a guy on facebook a couple of days back and this is his FTO, i kind of like the look this has.... was going to opt for something like it to be quite honest
and fog lamps are so that i can fit them in the new bumper dont really like the two circles from my side prefare the long one
was talking to a guy on facebook a couple of days back and this is his FTO, i kind of like the look this has.... was going to opt for something like it to be quite honest
and fog lamps are so that i can fit them in the new bumper dont really like the two circles from my side prefare the long one
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WTB parts
Just realised you are in Malta. Postage for a front bar will REALLY hurt from Australia.You are probably better off getting direct from Japan.Try Import Monster. Willbe your best bet price wise.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
dont really mind the post as long as i get the car to where i want
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WTB parts
Yep, but the cheapest way for you to get there if you want a stock facelift bar is import monster. Google it. Gives you access to Japan auctions. Cheapest source of facelift components.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- Vectose
- Forum Moderator
- Posts: 3948
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: WTB parts
Import Monster are an Australian company. don't think he would have much luck with them.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
ill give it a try one other thing anyone tried to fit the preface-lift fog lamps to the face lift ?
- Technikhaus
- Oldtimer
- Posts: 3656
- Joined: Wed Dec 28, 2011 4:45 pm
- Location: Dunedin - NZ
- Contact:
Re: WTB parts
Need to cut and mould to do that.
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
Other than that its a straight fit no?
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
d stocks how much for the front bumper and rear bumper?
and may i ask what wheels your using are they 18" if so whats your ride height
thanks
and may i ask what wheels your using are they 18" if so whats your ride height
thanks
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WTB parts
Hey,
Im running 17's with 225 x 45 R17 rubber. Have lowered apexi springs (lower by about 2.5cm at the front). Front bar sits 12cm off the ground.
Can do the bars at $450AUD each, but the postage cost would kill you as I cant get any special freight rates im afraid.
cheers
dstocks
Im running 17's with 225 x 45 R17 rubber. Have lowered apexi springs (lower by about 2.5cm at the front). Front bar sits 12cm off the ground.
Can do the bars at $450AUD each, but the postage cost would kill you as I cant get any special freight rates im afraid.
cheers
dstocks
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- Apprentice
- Posts: 79
- Joined: Tue Jan 01, 2013 6:22 pm
- Location: Malta
Re: WTB parts
what do you think the estimated dimensions of packing would be ? and weight if possible i can check with a local guy
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WTB parts
Well, front and rear bars would pretty much fit inside each other. Ill see if I can get some measurements.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you