mivec engine
Moderators: IMC, Club Staff
- FNTSY
- Grease Monkey
- Posts: 184
- jedwabna poszewka promocja
- Joined: Thu Jun 24, 2004 5:00 pm
mivec engine
ok guys cant be bothered to build the engine back up.
the mivec 6a12 is sitting at the workshop. it has the front bank removed eg the heads and cams are apart. the headgasket is removed and waiting to be built back up. i dont have the new head gasket nor can i be F^#ed to put it back together as my rx7 rebuild is killing me.
im selling the engine as is only needing the gasket to be installed to run. the rear bank hasnt been touched. i will supply all the heads etc in a bag along with the engine.
lm after $900. this is rather cheap compared to $2500-$3000 i was quoted when i need another engine.
any worskshop that has any idea could put this engine back together for you at a cost around about $150 and the gasket wouldnt cost much. (my special order gaskets were $380 for 2) so maybe $100ish.
any questions just ask.
need to sell
the mivec 6a12 is sitting at the workshop. it has the front bank removed eg the heads and cams are apart. the headgasket is removed and waiting to be built back up. i dont have the new head gasket nor can i be F^#ed to put it back together as my rx7 rebuild is killing me.
im selling the engine as is only needing the gasket to be installed to run. the rear bank hasnt been touched. i will supply all the heads etc in a bag along with the engine.
lm after $900. this is rather cheap compared to $2500-$3000 i was quoted when i need another engine.
any worskshop that has any idea could put this engine back together for you at a cost around about $150 and the gasket wouldnt cost much. (my special order gaskets were $380 for 2) so maybe $100ish.
any questions just ask.
need to sell
FNTSY MOTORSPORTS NEWCASTLE
###for all your boosting needs###
###for all your boosting needs###
-
- Oldtimer
- Posts: 1905
- Joined: Wed Aug 18, 2004 5:00 pm
- Location: Melbourne
- Contact:
-
- Apprentice
- Posts: 98
- Joined: Tue Feb 08, 2005 6:00 pm
Re: mivec engine
Do you still have that engine for sale? Few questions, how many km's has it done, condition of it, cam seals etc.FNTSY wrote:ok guys cant be bothered to build the engine back up.
the mivec 6a12 is sitting at the workshop. it has the front bank removed eg the heads and cams are apart. the headgasket is removed and waiting to be built back up. i dont have the new head gasket nor can i be F^#ed to put it back together as my rx7 rebuild is killing me.
im selling the engine as is only needing the gasket to be installed to run. the rear bank hasnt been touched. i will supply all the heads etc in a bag along with the engine.
lm after $900. this is rather cheap compared to $2500-$3000 i was quoted when i need another engine.
any worskshop that has any idea could put this engine back together for you at a cost around about $150 and the gasket wouldnt cost much. (my special order gaskets were $380 for 2) so maybe $100ish.
any questions just ask.
need to sell