6A13TT Front Cut on ON EBAY

HRD2BQT · Post by **HRD2BQT** » Thu Jul 06, 2006 5:56 pm

Hi guys

I was just browsing through ebay and found this one hard to find Mitsu engine.

I just tot I'd share the link with you guys incase some of you r in the market for an engine upgrade.

http://cgi.ebay.com.au/MITSUBISHI-V6-TW ... dZViewItem

new81e · Post by **new81e** » Fri Jul 07, 2006 2:33 am

hmmm... i wonder how much you have to spend...

Post by **Bennoz** » Fri Jul 07, 2006 10:39 am

There are 2 gents on this forum that will tell you... and I assure you it will cost the same as you paid for your car and then some!

Gpx_xxx · Post by **Gpx_xxx** » Fri Jul 07, 2006 12:37 pm

i suggest u change the engine it will be way quicker

Nacho · Post by **Nacho** » Fri Jul 07, 2006 4:55 pm

The custom intake manifold alone costs a ridiculous amount. Has anyone successfully made this conversion and retained the twin setup instead of reverting to single?

droidy · Post by **droidy** » Fri Jul 07, 2006 7:11 pm

i want this engine in non turbo form!!!!!!!!!!!!!

Nacho · Post by **Nacho** » Sat Jul 08, 2006 3:55 pm

It's a lot easier to find this engine in non-turbo form. And it's practically cheap enough to buy the whole car in non-turbo form.

droidy · Post by **droidy** » Mon Jul 10, 2006 2:48 pm

really? Well the mechanic I spoke to about it isn't sure he can find one, and he's got hookups!! This is the twin cam 2.5 v6 na engine you're saying is easy to find? Is it from a galant??? I want to make a hybrid mivec engine, cause I have a 6a12 mivec already, but bottom end needs a rebuild anyway.. expensive though case need custom rods/pistons