Posted: Mon Aug 06, 2007 7:30 pm
can i get the slidey thing inside the tip gear stick rail. i dont know what its called.
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://ftoaustralia.com/v3/
Half cut Parts free, everything will be dumped. Pick up only
Page 2 of 4
Posted: Mon Aug 06, 2007 7:33 pm
oh, and does the clock have the little plastic thing that you wind it to change the time, mine never came with one.
half cut
Posted: Mon Aug 06, 2007 9:03 pm
Is it the plastic strip that covers the inside of the shifter and moves with it when shifter changes positions?
half cut
Posted: Mon Aug 06, 2007 9:06 pm
cb stepper motor and alternator is available. pm for price
Posted: Tue Aug 07, 2007 12:07 am
yep, thats it
Shifter plastic slide
Posted: Tue Aug 07, 2007 10:39 am
Ok $15 plus postage.
Posted: Tue Aug 07, 2007 5:26 pm
deal, and do you have that little clock winder?
Posted: Tue Aug 07, 2007 10:36 pm
Are you parting out the rear engine mount?
Mike
Mike
engine mounts
Posted: Wed Aug 08, 2007 9:45 am
Is that the one on the gearbox or the ones below the gearbox from under the car. All mounts are for sale
Posted: Wed Aug 08, 2007 7:36 pm
The one on the engine crossmember that runs parallel with the side of the car, closest to the firewall. Any idea what condition it is in?
Posted: Wed Aug 08, 2007 8:56 pm
I will probably need some suspension parts, I'll let you know what I need when I hear back from my mechanic tomorrow 
suspension
Posted: Wed Aug 08, 2007 10:23 pm
Ok struts are available. Along with brakes and rotors.
Posted: Wed Aug 08, 2007 10:26 pm
How much for rotors ... Are they stock .. How much life is left on them ???
Posted: Thu Aug 09, 2007 12:47 pm
any chance the ECU is still there?
Me again from the USA..we are trying to crack the 2006 Eclipse 3.8L mivec ECU here..looking for the plugs and pins to make a plug and play set up.
One of our members has sucessfully wired his own stand alone AEM and tapped the stock ECU!!
Complete new wiring harness..so far he has leaned it out by 15% and got mad power..
any pics of the ECU pins would be great...we have contacted the Mit supplier of the ECU but they wont sell us the male plugs...
Me again from the USA..we are trying to crack the 2006 Eclipse 3.8L mivec ECU here..looking for the plugs and pins to make a plug and play set up.
One of our members has sucessfully wired his own stand alone AEM and tapped the stock ECU!!
Complete new wiring harness..so far he has leaned it out by 15% and got mad power..
any pics of the ECU pins would be great...we have contacted the Mit supplier of the ECU but they wont sell us the male plugs...
ecu harness
Posted: Thu Aug 09, 2007 1:10 pm
I'll get some pics up mate
rotors
Posted: Thu Aug 09, 2007 1:24 pm
Rotors seem fine, other then the surface rust. Heaps of meat left on them. $100 for the 2 plus post
Re: half cut
Posted: Thu Aug 09, 2007 1:39 pm
could I have the stepper motor if cb don't want it .. what price we looking at? thanksoverboostin007 wrote:cb stepper motor and alternator is available. pm for price
ecu
Posted: Thu Aug 09, 2007 5:43 pm
hi guys,
if the ecu is still there, isit for sale? my engine fuel mixture is screwed, mechanic (lee) says its the ecu.
if the ecu is still there, isit for sale? my engine fuel mixture is screwed, mechanic (lee) says its the ecu.
ecu
Posted: Thu Aug 09, 2007 6:02 pm
Yeah ecu is for sale. $80 plus post and it's yourz
Posted: Thu Aug 09, 2007 6:36 pm
Nevermind about the suspension parts, the mechanic tracked down the part today... turns out I snapped the stabiliser bar 