Page 2 of 3

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 12:23 pm
by bass_twitch
Taz wrote:
bass_twitch wrote:
Shane001 wrote: Too true. Even in NA form you can't just dump the clutch at full revs. When racing I launch at around 2500rpm off the start line, and have to feather the throttle in first to minimise wheel spin.
Yeh, That's what I normally do too.
Sounds like you boys need an LSD ;)
Sure do :thumright:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 12:29 pm
by Bennoz
It doesn't help, just means both wheels light up :lol:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:00 pm
by ZFL45H1
Only if u have an insane amount of boost lol
I can light up in 1st and a little 2nd that's it unlike u bennoz lighting up 3rd :D

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:18 pm
by Bennoz
ZFL45H1 wrote:Only if you have an insane amount of boost lol
I can light up in 1st and a little 2nd that's it unlike you bennoz lighting up 3rd :D
And 4th... Should see that happen on a freeway, most passengers reach for the 'oh sh*t' handle as I glaze up across 2 lanes :lol:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:26 pm
by ZFL45H1
I will pay to experience that would be awesome

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:38 pm
by bass_twitch
ZFL45H1 wrote:I will pay to experience that would be awesome
New source of FTO aus funding??

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:40 pm
by silverGPX
Just go onto a wet road and slip the clutch to get it going.

Same thing.

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:51 pm
by ZFL45H1
Not in 4th though

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 5:56 pm
by Taz
ZFL45H1 wrote:I will pay to experience that would be awesome

Got to do that for free when we went down to the bonfire, trust me you think its fast, but when you get in there and he winds it up....well yea

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 6:26 pm
by aza013
Just think how it will go with the happy gas on :twisted: .

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 7:12 pm
by ZFL45H1
I'm so there I wanna feel the raw power of this red demon :D

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:08 pm
by bass_twitch
ZFL45H1 wrote:I'm so there I wanna feel the raw power of this red demon :D
Taz wrote:
ZFL45H1 wrote:I will pay to experience that would be awesome
Got to do that for free when we went down to the bonfire, trust me you think its fast, but when you get in there and he winds it up....well yea

This thread is just too easy! :lol:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:10 pm
by ZFL45H1
:lol:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:17 pm
by Shane001
So Ben when you gonna send this rocket down the quarter? Gotta beat the brits to the 9 sec FTO bragging rights :thumleft:

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:25 pm
by Bennoz
Shane001 wrote:So Ben when you gonna send this rocket down the quarter? Gotta beat the brits to the 9 sec FTO bragging rights :thumleft:
Am just waiting on the light weight rotors to come out of the US & I'm good to go :cheers:

Oh & when I swap them out I gotta do one of the wheel bearings (already did one)

Won't run 9s by any stretch of the imagination. Be mid 12s I reckon once I get the hang of launching it on the strip.

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:30 pm
by Shane001
Bennoz wrote:
Shane001 wrote:So Ben when you gonna send this rocket down the quarter? Gotta beat the brits to the 9 sec FTO bragging rights :thumleft:
Won't run 9s by any stretch of the imagination. Be mid 12s I reckon once I get the hang of launching it on the strip.
+ add nitrous = 9secs come on Ben you can do it 8)

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 9:51 pm
by fraz91
Shane001 wrote:
Bennoz wrote:
Shane001 wrote:So Ben when you gonna send this rocket down the quarter? Gotta beat the brits to the 9 sec FTO bragging rights :thumleft:
Won't run 9s by any stretch of the imagination. Be mid 12s I reckon once I get the hang of launching it on the strip.
+ add nitrous = 9secs come on Ben you can do it 8)
You need grip to make 9's. I have no doubt it can be done in an FTO, but you'd need to remove a LOT of weight from the rear...

Re: Bennoz 6A13 Conversion

Posted: Mon Aug 27, 2012 10:10 pm
by spetz
You'll do 11s if you run slicks I think

Re: Bennoz 6A13 Conversion

Posted: Wed Aug 29, 2012 6:39 pm
by kermut
i see brake upgrades bro?? pics and what youve done bro :D...im looking at evo 7 brembos and the hubs i got told thats what i need, true??

Re: Bennoz 6A13 Conversion

Posted: Wed Aug 29, 2012 8:33 pm
by Bennoz
kermut wrote:i see brake upgrades bro?? pics and what youve done bro :D...im looking at evo 7 brembos and the hubs i got told thats what i need, true??
Evo 5 to 9 is all the same calipers & rotors bro :)

I used mostly Evo 5 gear. All in here viewtopic.php?f=10&t=26018&start=120

Might have to go back a few pages for the nitty gritty.