Washed my Silver car, cleaned inside and out and everywhere in between.
Changed my toll tag from black to silver car
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 5:01 pm
by I8A4RE
fucccckkkkkk, ripped my front bar off on my drive way, guess I will be fibreglassing tomorrow.
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 5:04 pm
by custommodz
Front bar off for CAI tomorrow.
Replace busted sway bar with new one from D + poly bushes.
Pray that new king springs (brand new from ebay in orignal box only $70) and kyb shocks ($450 from rpw) have arrived. Replace all of those.
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 5:27 pm
by brad_gpx
washed and polished my car and cleaned out the interior
the interior was so messy it could barely fit one person in
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 7:34 pm
by vipfto
I8A4RE wrote:fucccckkkkkk, ripped my front bar off on my drive way, guess I will be fibreglassing tomorrow.
Nooooo I'm so scared of doing it too, so have raised mine a little bit more than needed just incase but still scrap
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 7:37 pm
by I8A4RE
Yeah I have had to make ramps because were the start of the drive meets the road, there is a ditch. Someone stole one of me ramps the other day so I had to use my old. As I was crossing it (which I have to do in reverse) I must not have been on centre and slipped off the side. The ramp slammed up and broke the passanger side mounting point.
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 7:53 pm
by aza013
Oh no not good at all.
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 7:58 pm
by vipfto
Yeah my driveway is ok but so embarrasing when I go to exit on to a road somewhere and i hear the scrap and know its not going to go out without doing some damage then having to turn around and reverse out
The looks I get and not too mention the occasional pissed off other car near me
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 10:03 pm
by Kustom
I8A4RE wrote:fucccckkkkkk, ripped my front bar off on my drive way, guess I will be fibreglassing tomorrow.
So umm... simon ay.... how good are you at fibreglassing
Re: What work did you do on your car today?
Posted: Fri Jul 09, 2010 11:59 pm
by -Nighthawk-
I want to attempt to redo my tappets tomorrow, but I don't trust myself
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 12:47 am
by Kustom
-Nighthawk- wrote:I want to attempt to redo my tappets tomorrow, but I don't trust myself
This is how i feel with everything on my car.
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 1:11 am
by custommodz
Kustom_FTO wrote:
-Nighthawk- wrote:I want to attempt to redo my tappets tomorrow, but I don't trust myself
This is how i feel with everything on my car.
Its fairly easy, just use another screwdriver to plug the deep gaps near the tappet you removed to save from 40 minutes fishing them out.
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 3:18 am
by Tippin
I8A4RE wrote:fucccckkkkkk, ripped my front bar off on my drive way, guess I will be fibreglassing tomorrow.
haha so did i, except it wasn't my driveway. Its all cracked along one side where ive moulded the DC lip to the stock bar
bugger
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 7:43 pm
by zuihoujueding
my mechanic did
1) VRS kit service
2) machine the heads and dip in acid bath
3) clean out all sludge, The amount of sludge at the cam area is unbelievable!
4) replace 8.5mm magnecor ignition coils
5) replace NGK iridium IX sparkies
6) Changed Nulon gearbox oil, added Nulon G70
7) Flush with Liquimoly Engine detox and change to Valvoline engine armour 10W-40 engine oil change coolant.
9) replace alternator pulley and crank pulley with aluminum ones.
10) clean and seal reseal oil sump.
11) replace head bolts and some seals which are not included in the VRS kit
The mechanic found out that my timing belt is actually miss aligned by one tooth.
Results: Now the car sounds totally different. so much eager and louder than ever. Noticably feels more responsive and will update if the fuel consumtion have imrpoved.
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 7:53 pm
by Gholdwayne
new rear tyres from taleb tyres for my 17x8s. 205/45 falkens for 120 a tyre fitted.
also slightly guttered my passenger side rear rim so now i have to do some rim repair. damnit
Re: What work did you do on your car today?
Posted: Sat Jul 10, 2010 8:10 pm
by Supplanter
Had my front tyres replaced yesterday, cheap Marshalls. Tyre shop was clearly owned by Outlaw members. Skull memorobillia everywhere, skull and fire tattoos on the owner's arms, and a big f**k off dog behind the counter
Re: What work did you do on your car today?
Posted: Sun Jul 11, 2010 3:37 am
by AJ
I8A4RE wrote:fucccckkkkkk, ripped my front bar off on my drive way, guess I will be fibreglassing tomorrow.
Devo! Hope it works out ok for you.
Re: What work did you do on your car today?
Posted: Mon Jul 12, 2010 2:30 am
by brad_gpx
Kustom_FTO wrote:
-Nighthawk- wrote:I want to attempt to redo my tappets tomorrow, but I don't trust myself
This is how i feel with everything on my car.
I feel like this now. Just make sure you put it back together perfect lol.
Re: What work did you do on your car today?
Posted: Mon Jul 12, 2010 11:12 am
by Gholdwayne
lolz, this is a day overdue, but rolled the rear guards with the help of olly... did one each
Re: What work did you do on your car today?
Posted: Mon Jul 12, 2010 1:57 pm
by I8A4RE
Gholdwayne wrote: lolz, this is a day overdue, but rolled the rear guards with the help of olly... did one each