FTO AUSTRALIA

is there much difference between this and the HKS super power flow?
im running the HKS atm and just replaced the filter element and this is quite pricey for a slight upgrade

a lot of difference, I've assumed your just talking the filter (please correct me if I'm wrong). This is a kit from the throttle body, to a new pod filter in a box and cold air intake designed specifially for the FTO with proven gains.


Any updates please Ben???????

Yep, was out at UAS Wednesday, the pipes have arrived. I've organised for a standard intake pipe to be sent to them, so they can take the measurements they need for the little manifold pressure line, then thats all they need. We'll get a price then & they'll start putting the kits together Will keep everyone posted. Should only take a weeke or 2.

fantastic, thanks Ben

1. Taeivon_rep GPX (confirmed)
2. djbust (confirmed) - GPX - BLUE
3. db (confirmed) - GPX
4. elusi0n (confirmed) - GPX - RED
5. mr2yen
6. xSlurpee (confirmed) - GPX - BLUE
7. oodLes (confirmed) - GPX
8. RallyMad (confirmed) - GPX
9.KJ_bob (comfirmed) - GPX - RED
10. Sublime19 (confirmed) - GR
11. cb - GPX
12.Benedict_xiii (confirmed) GPX
13. Aza - gpx

I only want the pipe so the rest will be up for sale

unless I can just get the pipe. Do you know what the price is for just that Ben?

i will take the box of you aza.

1. Taeivon_rep GPX (confirmed)
2. djbust (confirmed) - GPX - BLUE
3. db (confirmed) - GPX
4. elusi0n (confirmed) - GPX - RED
5. mr2yen
6. xSlurpee (confirmed) - GPX - BLUE
7. oodLes (confirmed) - GPX
8. RallyMad (confirmed) - GPX
9.KJ_bob (comfirmed) - GPX - RED
10. Sublime19 (confirmed) - GR
11.Benedict_xiii (confirmed) GPX
12. Aza - gpx

Sorry guys. I gotta save my pennies for a legnum.

1. Taeivon_rep GPX (confirmed)
2. djbust (confirmed) - GPX - BLUE
3. db (confirmed) - GPX
4. elusi0n (confirmed) - GPX - RED
5. mr2yen
6. xSlurpee (confirmed) - GPX - BLUE
7. oodLes (confirmed) - GPX
8. RallyMad (confirmed) - GPX
9.KJ_bob (comfirmed) - GPX - RED
10.Benedict_xiii (confirmed) GPX
11. Aza - gpx

I've bought Ben's pipe guys, I won't be needing this one anymore, sorry to bail.

i am atm straped for cash so i am out aswell
1. Taeivon_rep GPX (confirmed)
2. db (confirmed) - GPX
3. elusi0n (confirmed) - GPX - RED
4. mr2yen
5. xSlurpee (confirmed) - GPX - BLUE
6. oodLes (confirmed) - GPX
7. RallyMad (confirmed) - GPX
8.KJ_bob (comfirmed) - GPX - RED
9.Benedict_xiii (confirmed) GPX
10. Aza - gpx

updates?

nothing better than last minute pull outs ....

(hey ben, havent UAS made these kits already? i might as well go there and buy it for the full price)

Bennoz wrote:Yep, was out at UAS Wednesday, the pipes have arrived. I've organised for a standard intake pipe to be sent to them, so they can take the measurements they need for the little manifold pressure line, then thats all they need. We'll get a price then & they'll start putting the kits together Will keep everyone posted. Should only take a weeke or 2.

Ok so it has been 2 weeks but I'd say Ben is probably just a little busy with the 6a13. Just hold on people I'm sure we'll get an update when news is forthcoming.

Will update tomorrow

Yeeeah.. tomorrow...

Sorry bout the delay guys.

Ok, confirmed UAS has everything they need to make the kit. Unfortunately, some of UAS's suppliers have put their prices up, as such the best they can do for me on a buy of 10 units is the same as the old list price of $395. (See the list price now has gone up to $450.) I know that may put a few of you off, so please let me know now rather than later if you have to pull out. As mentioned the kits are pretty much all ready to go.

Total kit consists of:
Unifilter (oiled, cleanable type.)
Intake pipe
Manifold pressure pipe & fitting (connects to intake pipe)
Cold air box
Cold air box seal (rubber seal fitting that goes around the intake pipe where it enters the box to seal it)
All related hose clamps.

Now, at this stage we've made no allowance for postage. So in order to keep costs to a minimum, we can do this a number of ways. I'll pickup the whole order, for NSW people I can hold onto them at my work & people can come pickup, or I can bring them all to DIY day. For interstate people, I can ship them all to one person & then everyone picks up from that person etc.

I can freight from work for free, but the less items I send, the better... the mail room folk start to look at me funny otherwise (and not 'funny' in a good way lol.)

So please add your state & if you need it to be shipped direct. If not shipped direct, we'll work out a common pickup points in each state.

Name.................Make...........................State....................Direct Delivery (Yes or No)
1. Taeivon_rep GPX (confirmed)
2. db (confirmed) - GPX
3. elusi0n (confirmed) - GPX - RED
4. mr2yen
5. xSlurpee (confirmed) - GPX - BLUE
6. oodLes (confirmed) - GPX
7. RallyMad (confirmed) - GPX
8. KJ_bob (comfirmed) - GPX - RED
9. Benedict_xiii (confirmed) GPX
10. Aza - GPX

PS Aza - at this stage I cant do you just a pipe, BUT if we find one more buyer for a complete kit, I can They bought 11 pipes.

thats all good mate I will get the lot and sell the bits I dont want.
thanks for trying for me

Also when would you like the money for them? and do you want it put in to the FTO AC?

oh and the DIY day is good for me to pick up the kit.

Mine will def need to be shipped, sydney is a long drive away
U have pm bennoz

is it possible to go there and pick it up for 450$? or do we all have to give ben the money and he'll collect the total amount fpr 50 dollars cheaper?

xSlurpee wrote:is it possible to go there and pick it up for 450$? or do we all have to give ben the money and he'll collect the total amount fpr 50 dollars cheaper?

Im going to pretend you didn't ask that Charlie & say no. You have to give me the money. I' know you're in a hurry, just hang in there