Page 5 of 10
Posted: Wed Apr 07, 2004 11:56 pm
by Boris
smorison wrote:the gain on a tiptronic is 6kW give or take depending on mods (see hte uniqueFTO section of the site).
Thanx mate, sorry to bug you again,
I read the thing in the "FTO Project", but I need to clarify, is the gain:
A) Going from a stock form to the UAS intake kit.
B) From an aftermarket airfilter to the UAS intake kit + the air filter.
The question that I was really interested in was, would there be much gain from just replacing the stock plastic intake tubing to the UAS one. Providing you are keeping the air filter that you already have...
Posted: Thu Apr 15, 2004 9:23 pm
by EURO
just a quickie,
Would UAS put any thinking into doing the same air piping but in a polished metal like the one from funky product?
or would it become to expensive?
Just would look a whole lot smarter
thanks.
Posted: Fri Apr 16, 2004 3:44 pm
by smorison
EURO wrote:just a quickie,
Would UAS put any thinking into doing the same air piping but in a polished metal like the one from funky product?
or would it become to expensive?
Just would look a whole lot smarter
thanks.
our goal was to create an OEM style intake so it doesn't draw too much attention when the coppers open your car up.
we could probably get one made (the mould is stainless) it will cost you a foturne though as it will be a one off.
Posted: Thu Apr 22, 2004 12:41 pm
by rxboy
When is UAS shipping them out?
Posted: Thu Apr 22, 2004 7:44 pm
by smorison
rxboy wrote:When is UAS shipping them out?
very shortly...
i've been way to busy this week to get into unique i am going to try and get in there tomorrow morning before i go to work.
Posted: Sun Apr 25, 2004 10:20 am
by mrx
Ok, so only just got my car. Haven't read through every post. Still available? Interested in the first items only ($220).
Posted: Tue Apr 27, 2004 10:45 pm
by smorison
mrx wrote:Ok, so only just got my car. Haven't read through every post. Still available? Interested in the first items only ($220).
yep send me an email and i'll send you the details
Posted: Wed Apr 28, 2004 12:28 am
by TimmyD
any updates on the eta?
Tim
Posted: Thu Apr 29, 2004 4:19 pm
by smorison
yeah it will all be ready in a few days.... just had a delay from one of the manufacturers.
Posted: Tue May 11, 2004 7:09 pm
by smorison
hey guys,
these will start shipping out to you next week for those who have payed already...
if you haven't paid we may be able to tack you onto the order however please email me (no pm's).
Posted: Wed May 12, 2004 7:28 pm
by msbchi
Hi guys I'm new at this compu-techno sh.. so appologies up front & down to biz. Bought the mssus a GPX 12 Mnths ago (hence the handle) and found mslf a new toy. Done a few minor mods i.e. black T/lights GMax-Blackmax 17s but I digress I lust after the airbox kit but want to know if the heat shield on the side can be extended up to the bonnet with a mesh triangle vent cut in the bonnet thus eliminating the top heat shield
Posted: Wed May 12, 2004 7:55 pm
by smorison
msbchi wrote:Hi guys I'm new at this compu-techno sh.. so appologies up front & down to biz. Bought the mssus a GPX 12 Mnths ago (hence the handle) and found mslf a new toy. Done a few minor mods i.e. black T/lights GMax-Blackmax 17s but I digress I lust after the airbox kit but want to know if the heat shield on the side can be extended up to the bonnet with a mesh triangle vent cut in the bonnet thus eliminating the top heat shield
you would have to do it yourself... you would have to buy the kit and modify it to suit... i could probably arrange to get one made up without the nut holes in it
Posted: Mon May 17, 2004 10:50 am
by TimmyD
Hey,
Just wondering how long these take to arrive from syd. to melb.
Cheers
Tim
Posted: Thu May 20, 2004 11:11 pm
by rxboy
Has anyone in Melbourne got theirs yet? I haven't
Posted: Thu May 20, 2004 11:43 pm
by TimmyD
nor i
Posted: Thu May 20, 2004 11:51 pm
by Supplanter
I am in the nope boat too.
Posted: Fri May 21, 2004 1:03 am
by smorison
Supplanter wrote:I am in the nope boat too.
the damn manufacture (not UAS) made them tooo thick... we've sent them back and they are making so more... i'll be at UAS on saturday hopefully i'll be able to start packing and shipping then
Posted: Fri May 21, 2004 1:24 am
by Boris
smorison wrote:the damn manufacture (not UAS) made them tooo thick... we've sent them back and they are making so more... i'll be at UAS on saturday hopefully i'll be able to start packing and shipping then
Does that mean that my one and Jono's is too think too?
Posted: Fri May 21, 2004 9:28 am
by TheSentry
Is it still possible to get the CAI kit at the group buy price? I intended to get it when the group buy thing kicked off, but alas the funds weren't available.
I've got some cash now though. Please help a poor cobber out.
Posted: Fri May 21, 2004 10:57 am
by GPXXX
Steve, i liked your 'artistic' touch on the rubber intake tube from last weekend @ Wakefield... hehehehe
