FTO AUSTRALIA

Could be..

I've got a spare if you wanted to test it.

Bennoz wrote:Could be..

I've got a spare if you wanted to test it.

Thanks for the offer, but am on the other side of the world..

Dave, see if Don (RedGPX) or S&S spares on FTOOC have got spare knock sensors for you to try.

Does your engine check light work when you first turn your car on? If not check the bulb.

Check the output voltage of your TPS. Should see 4.5 - 5 volts at what.

payaya wrote:Does your engine check light work when you first turn your car on? If not check the bulb.

Check the output voltage of your TPS. Should see 4.5 - 5 volts at what.

Yes the check light works when i switch it one, where should i see the voltage on what wires ?

Dave1971 wrote:

payaya wrote:Does your engine check light work when you first turn your car on? If not check the bulb.

Check the output voltage of your TPS. Should see 4.5 - 5 volts at what.

Yes the check light works when i switch it one, where should i see the voltage on what wires ?

http://www.3si.org/wiki/index.php/TPS_T ... Adjustment

But the FTO TPS wires are the exact opposite to the above guide.