Page 1 of 3
i'm getting twins
Posted: Tue Feb 17, 2009 8:33 pm
by alekazam
yes the same as dstocks except i'm using a single oval twin 3" tip xforce varex muffler thats going to go where the stock muffler fits. The tips are getting cut off and two 3'' stainless steel pipes welded on one going to the right hand side the other donuts around the back of the muffler and to the left. then thay split into twin stainless steel Blue Diamond tips that curve up slightly. shes going in this thursday and the hole job will cost
$870 thats $400 for the muffler $260 for the tips and $200 for labor. the cat I had already.
<a href="
http://s50.photobucket.com/albums/f303/ ... 4474-1.jpg" target="_blank"><img src="
http://i50.photobucket.com/albums/f303/ ... 4474-1.jpg" border="0" alt="Photobucket"></a>
Posted: Tue Feb 17, 2009 8:46 pm
by J
thats going to look sweet... Is that a silencer i see?
Posted: Tue Feb 17, 2009 9:03 pm
by alekazam
thanks im really existed. no thats the cat
Posted: Tue Feb 17, 2009 9:26 pm
by J
LOL no i know thats the cat at the top... But ive seen some exaust with electronic silencers which uses a remote to send a signal to the exhaust to silence it... Not those big plug things
Posted: Tue Feb 17, 2009 9:28 pm
by Tippin
yeh its an electronic silencer, all varex mufflers have em
Posted: Tue Feb 17, 2009 10:14 pm
by xSlurpee
dam thats hot, cant wait to see the finished product
Posted: Wed Feb 18, 2009 7:05 am
by dstocks
That is going to look good!
Posted: Wed Feb 18, 2009 12:24 pm
by harry90
Definately gonna be great.
Posted: Wed Feb 18, 2009 12:49 pm
by eddiii
is it going to be dual twin? are you from syd? cause i want to do mine too. ^^
Posted: Wed Feb 18, 2009 2:03 pm
by alekazam
yes dual twin and no sorry not from syd
Posted: Wed Feb 18, 2009 2:06 pm
by dstocks
Want an individual for long was I........
Posted: Wed Feb 18, 2009 2:12 pm
by eddiii
Posted: Wed Feb 18, 2009 2:15 pm
by alekazam
Now we're all going to have dual twin but you were the first
Posted: Wed Feb 18, 2009 2:16 pm
by Bennoz
That is one of the most craptacular mandrel bend fails you'll ever see...
Unless you plan on having that redone, I wouldn't touch it with a 10 foot pole.
Posted: Wed Feb 18, 2009 2:23 pm
by alekazam
i hope mine'don't end up looking like that
Posted: Wed Feb 18, 2009 2:25 pm
by eddiii
Done, thanks ben fot the advice ^^ not gona get it now....i guess i should just get it done custom at the shop, anyone can recommend a exhaust shop in sydney?
Posted: Wed Feb 18, 2009 2:29 pm
by Bennoz
Where abouts in Syd?
Posted: Wed Feb 18, 2009 2:47 pm
by eddiii
sorry for stealing thread alek lol,
Im near hurstville/bankstown area.
Posted: Wed Feb 18, 2009 3:55 pm
by alekazam
thats ok its a ralivent divergent
Posted: Wed Feb 18, 2009 7:20 pm
by nvr2low
Bennoz wrote:
That is one of the most craptacular mandrel bend fails you'll ever see...
Unless you plan on having that redone, I wouldn't touch it with a 10 foot pole.
haha ben that looks like some of the stuff you would get done in darwin mate, some of the stuff is not good up here
