Page 1 of 2
Magnecor Leads
Posted: Tue Mar 03, 2009 10:45 am
by I8A4RE
Wheres the cheapest place?
Also would 6A13 coil packs fit the 6a12??
Posted: Tue Mar 03, 2009 11:34 am
by Bennoz
Physically yes, same as a GR, but they are different part numbers. Why, I dont know..
For the leads, buy direct:
http://www.magnecor.com.au/
Make sure you give him the eact dimensions thou, he always seems to f*ck that up.
Posted: Tue Mar 03, 2009 12:24 pm
by I8A4RE
Do you know what the exact dimensions are?
Posted: Tue Mar 03, 2009 2:58 pm
by Bennoz
Nope
perhaps Dwayne has a set you could get dims from..
Posted: Tue Mar 03, 2009 5:16 pm
by KJ_bob
got a set of these sitting at home... do u guys know of anyone that could put them in and how much it would cost with some sparkies (not including the price of the spark plugs)
Posted: Tue Mar 03, 2009 7:05 pm
by Bennoz
I'll put 'em in for a case!
Seriously... maybe 2 hours labour tops. So whatever your local shop charges (eg $80 an hour) and you can do the math from there. Intake manifold has to come off.
Posted: Tue Mar 03, 2009 7:17 pm
by dstocks
Now Aza has an intake manifold for me. If I got myself a set of those leads, and there is a bit of DIY time before the bonfire I could maybe have a case waiting.......
Posted: Tue Mar 03, 2009 7:37 pm
by I8A4RE
Goddammit (eric cartman)
This my thread, get your thread.
zOk got quoted fot 7mm leads $165 thats sh*t aint it???
Posted: Tue Mar 03, 2009 7:42 pm
by mr-charisma
I8A4RE wrote:Goddammit (eric cartman)
This my thread, get your thread.
zOk got quoted fot 7mm leads $165 thats sh*t aint it???
I was quoted $120 - $130 from Magnecor .. based at springwood..
Posted: Tue Mar 03, 2009 7:42 pm
by dstocks
Sorry, Ill shut up
Posted: Tue Mar 03, 2009 7:47 pm
by Bennoz
dstocks wrote:Sorry, Ill shut up
Well im not, its my f*cking forum
dstocks wrote:Now Aza has an intake manifold for me. If I got myself a set of those leads, and there is a bit of DIY time before the bonfire I could maybe have a case waiting.......
Done
Posted: Tue Mar 03, 2009 10:10 pm
by JOeJOe
I remember it being 8mm, got it delivered for $135
Posted: Tue Mar 03, 2009 11:10 pm
by KJ_bob
JOeJOe wrote:I remember it being 8mm, got it delivered for $135
8mm is for mivec
Posted: Wed Mar 04, 2009 7:18 am
by Bennoz
Both sets are 8mm. You can't go any bigger cause the leads then wont fit into the plug boots... I asked
Posted: Wed Mar 04, 2009 8:16 am
by I8A4RE
JOeJOe wrote:I remember it being 8mm, got it delivered for $135
Where from mate.
So this guy is a complete wank (from springwood) I thought they were suppose to 8mm and when he said 7. I question him about and then even said i have turbo'ed mine and he said that 7mm was the only ones. arrrrrrrrrrggggggggghhhhh.
Anybody got a friggan part number?
Posted: Wed Mar 04, 2009 9:04 am
by JOeJOe
Got it direct from teh guys in Sydney, check the website bennoz put up earlier.
Check RPW, they sell them.
Posted: Wed Mar 04, 2009 9:06 am
by Bennoz
Last time we got 'em in it was in a group buy from Andrew at Kudos Motorsports. They're not listed in his shop thou, you'll need to call.
http://www.kudosmotorsports.com/
Fairly sure the part number is 68100
http://www.magnecor.com.au/download/lea ... 0index.pdf
Can even get 'em from Camskill. Might work out at about $130 landed...
http://www.camskill.co.uk/products.php?plid=m3b0s9p1293
Posted: Wed Mar 04, 2009 9:06 am
by JOeJOe
Got it direct from teh guys in Sydney, check the website bennoz put up earlier.
Check RPW, they sell them.
Posted: Wed Mar 04, 2009 9:07 am
by Bennoz
But yeah, I went direct to the guy that makes them down here. A sh*tty little shop in Parramatta, the guy is a chain smoker & just bangs them out as they're ordered.
Posted: Sat Mar 07, 2009 4:43 am
by yano
sh*t simon, didnt see this one earlier.
Thundercords
Rear Unit 10, 159 Chifley Street,
SMITHFIELD, NSW 2164
Phone: (02) 9604-9946
Fax: (02) 9604-9947
Conatct: Bob or Neil
$132 delivered to my door. I netbanked them the money, then they arrived 2 days later. I've got my set installed. If however the gpx ones fit a gr, your welcome to mine as long as you just replace them with something a lot cheaper that'll do the job nicely