speedo cluster (or just the speed kph part anyway)
Posted: Tue Aug 10, 2010 3:17 am
hi, im now in desperate need of a new speedo cluster, was fidling around with the cluster (puttin new blue lights in behind them) and i must have applied too much voltage to test, apparently my 12v transformer is putting out 20 volt instead,, so now my odometer illuminates with no numbers and the speedo starts at about 150ks at start off,,, now i know there are things to get around the speedo, like take off the needle and put it back to 0kph, but my rpm meter has gone aswel (most likely ignition failure sensor), so i would rather just get a new 1 instead of fixing the 3 problems
the odometer bit is important though, i dont know how to get around that,
so i need a cluster with 91-92000ks, (give or take, i would like it within 7,000ks either side of it)
thanks guys
the odometer bit is important though, i dont know how to get around that,
so i need a cluster with 91-92000ks, (give or take, i would like it within 7,000ks either side of it)
thanks guys