FTO AUSTRALIA

Im selling as a complete set the following (Original Prices listed after each item)



2.529 ltr Engine with slightly longer than normal rods which give a better Rod Ratio to allow you to rev higher safer.
Original Engine 600.00
Forged Crower Rods 1,200.00
Forged JE Pistons 800.00
Balanced Crank/Pistons/Rods 400.00
Light Weight Crank pulley 150.00
1.2mm head gasket 275.00
Ported heads 600.00
ARP HEAD STUDS 150.00
Uprated valve springs 100.00
adjustable cams 290.00
HKS 272/300 profile cams 850.00
6 x 540cc injectors 600.00
Findanza Flywheel 250.00
Ported Plenum (With Direct port nos) 400.00
Ported Throttle body 200.00
Nos Kit 400.00
GT35r Turbo 1,200.00
Custom Manifolds, down pipe & exhaust 2,000.00
Intercooler + pipework 800.00
Wiring Loom 400.00
Custom Clutch 450.00

Total Original Costs 12,115.00

I'm selling the lot for £7000 ovno. All you would need is an autronic ECU (you can have mine for £1000) and it would all drop straight in.

How much would it cost to freight it here from the UK?

Unforunately, I'd hate to think.

You would be looking at round the $1200 I would say unless you had a company account in which case it would more like $700

So roughly around 12k AUD + Postage.

Plus import duty & GST.

Sheeeeet

Plus the cost to upgrade your brakes, suspension, exhaust, fuel pump, etc. just to run the engine.

Impressive engine though and bloody tempting!

Im going for an EVO lump now with even more power

RichardB wrote:Im going for an EVO lump now with even more power

Good Luck! Let us know how you go

Ive just finished fitting my dog box, so a couple of last runs with this engine to see if we can get it into the 10's

Even 3000gt owners would be happy with this... Looks like a very well thought out motor.

You must be running 4wd by now right?

Feel like taking a trip to Aus and having the motor as carry on?

Still FWD

RichardB wrote:Still FWD

11 seconds on a FWD

*faps*


Good luck with the sale

Hey man were did u buy the cams and uprated valve springs from

cams were rpw, springs were custom as the uprated ones I got from rpw were not strong enough.

and heres the engine still in action last time out

http://www.youtube.com/watch?v=dHWOmBZ6 ... ture=email

I love that vid Rich

Bennoz wrote:I love that vid Rich

+1

Richard, any chance of seeing some more pics of your black Fto?
Thanks