Page 1 of 1
Just some stuff im getting
Posted: Thu Dec 23, 2010 3:24 pm
by renzkuken1
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 3:40 pm
by Gholdwayne
Those ralliart caps look mighty fine there!
I think if it was me, I would just settle for those ones on ebay. I think they are cheap as chips already.
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 5:20 pm
by spency
Caps look mint.
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 6:26 pm
by Grue
The straight replacement dash wedge bulbs in the main cluster are not T5 matey.... they're T6.5.
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 8:34 pm
by bduffman
6.5s are hard to find i read some where on here that the t5s will work but wont be a good fit and the t10s can be made to fit
any one know if the stock t6.5 are placed in holders ( meaning can remove the bulb and place thoses t5s in to the holder )
o and theres cheaper bolt lights then them ones but ive bought from that company befor they seam alright ( altho the blue leds i bought from them wernt that great had bubbles in some of the lenses )
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 8:44 pm
by Grue
yeah, the 6.5's will slot straight into the holders. T5's will fit, but will wobble around and potentially lose contact. T10's you need to break the housing off and use the legs.
I've done all 3 methods. Happiest with T6.5 and can't see me changing.
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 9:24 pm
by renzkuken1
idk what you guys are talking about :/
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 9:34 pm
by Gholdwayne
LOL!
its the size of the bulb...
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 9:36 pm
by renzkuken1
ahh haha k
so where do i find t6.5
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 9:59 pm
by bduffman
yea i want some 6.5 greens any one know of any companys that sell them cant seam to find 6.5s any where
Re: Just some stuff im getting
Posted: Thu Dec 23, 2010 11:54 pm
by Grue
Green:
http://cgi.ebay.com/2x-T6-5-24-SMD-3-LE ... 19b8b25c12
These are different shape to mine though. The heads might be too wide to fit through the hole from the back, so may need to insert the wedge through the hole from the other side, then attach the holder. The wedges on mine were a tad thick like these, but were able to be pushed into the holder with a bit of coercion.
If in doubt... you can always use the old Ruchi method: a T10 with the housing broken off:
T5: Bulb with a 5mm Wedge base
T6.5: Bulb with a 6.5mm Wedge Base
T10: Bulb with a.... yup, you've got it
