Page 1 of 1
Can't find it anywhere
Posted: Mon Jul 11, 2011 10:43 pm
by silverGPX
I've blown the waterpump on my GPX. I know that I just need a HJ Galant Waterpump.
But at the same time i want to do both pulleys i know there both koyo items.
I know the part number for a Gates timing belt is a T987.
But what im wondering is what is the part number for a Dayco GPX Timing Belt,
and is there a kit with the pulleys and timing belt in the Dayco. All i seem to find is the Dayco kit for a GR.
Any help appreciated
Re: Can't find it anywhere
Posted: Mon Jul 11, 2011 11:59 pm
by Gholdwayne
I saw a Mivec kit from ebay.... Did specify that it wouldn't fit a non-Mivec.
Re: Can't find it anywhere
Posted: Tue Jul 12, 2011 7:53 am
by silverGPX
yeah i saw that too it had two koyo tensioners and a "sun" timing belt for $200. Is that cheap or...?
Re: Can't find it anywhere
Posted: Tue Jul 12, 2011 8:47 am
by Bennoz
Why not just grab them from Meek?
http://www.meek.com.au/index.php?act=vi ... ductId=349
Then grab a gates belt from Auto One / Super Cheap / Repco etc.
Re: Can't find it anywhere
Posted: Tue Jul 12, 2011 2:06 pm
by Gholdwayne
silverGPX wrote:yeah i saw that too it had two koyo tensioners and a "sun" timing belt for $200. Is that cheap or...?
Maybe buy that kit and get the Gates mivec belt - the ebay kit has seals too...
Re: Can't find it anywhere
Posted: Tue Jul 12, 2011 2:16 pm
by silverGPX
Thanks ben, do you reckon i could get them cheaper at a bearings shop or u think thats the cheapest?
Re: Can't find it anywhere
Posted: Tue Jul 12, 2011 8:16 pm
by Bennoz
silverGPX wrote:Thanks ben, do you reckon i could get them cheaper at a bearings shop or you think thats the cheapest?
Look you probably could, but not by much I dont reckon...
Re: Can't find it anywhere
Posted: Wed Nov 16, 2011 2:44 pm
by silverGPX
I ended up getting the tensioners very cheap from bearing shop
Re: Can't find it anywhere
Posted: Wed Nov 16, 2011 6:25 pm
by payaya
Please share. Did you press out the old bearings?