Page 1 of 1

attention NSW seagulls- parts from escapingfate's fto

Posted: Mon Aug 22, 2011 9:03 pm
by djjones
ok so i bought it so i could have the engine, here is whats left and in reasonable condition:

-4 x stock wheels (with 205x50 tyres, three are good one is punctured)
-both the doors (windows are fine, one door only has a smallish paint chip the other has a bit of a dent near the handle)
-the boot lid with the hydraulic things still on it
-the radiator with the fans attached
-both tail lights
-rear bumper (some paint off but structurally ok)
-rear left quarter panel (the only body panel barely touched in the crash, only some light scratching)
-all the seatbelts and seatbelt sockets
-back seat
-the whole wiring loom
-fuel hatch
-some bits off the old engine are ok, camshaft sprockets, mounts etc
-also heaps of moulded plastic, door trims, leaf catcher grate under the windscreen

anyone want any of these let me know what you want, give me an offer and maybe an email address so i can send pics because im useless with pictures on here. on the central coast
thanks

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Mon Aug 22, 2011 10:14 pm
by SchumieFan
what about the suspension???

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Mon Aug 22, 2011 10:43 pm
by djjones
keeping the suspension, going to swap it over onto mine :D

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 23, 2011 9:00 pm
by klyfe
Does it have the front wheel arch splash guards on it?
If so, how much would you be looking for?

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 23, 2011 9:21 pm
by SchumieFan
klyfe wrote:Does it have the front wheel arch splash guards on it?
If so, how much would you be looking for?
i have the complete front right but not the left side

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 23, 2011 10:06 pm
by klyfe
SchumieFan wrote:
klyfe wrote:Does it have the front wheel arch splash guards on it?
If so, how much would you be looking for?
i have the complete front right but not the left side
Dang! It's actually the passenger side that I need haha.
After putting on the new front bumper at the bonfire, we had to tuck them into the bumper until I drilled holes to hold it in place, and on the way home the passenger side slipped out and got shredded :(

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 23, 2011 10:31 pm
by gpx000
how much for right tail light?
pm please :D

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 30, 2011 8:52 pm
by djjones
ok still got:
- both the doors with window and electrics intact, $50 each
- boot lid with hydraulic lifters on it, $40
- both taillights $50 for the pair
- also got seatbelts, backseat
- wheels and steering wheel are on ebay at the moment

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 30, 2011 9:25 pm
by Connor_1994
ill take both tail lights no doubt about it, $50 for the pair, sold (:
pm me with details for money transfer etc, do u have any idea on postage to queensland, doesnt matter how much really
do u have any more lights

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Aug 30, 2011 11:24 pm
by gpx000
Connor_1994 wrote:ill take both tail lights no doubt about it, $50 for the pair, sold (:
pm me with details for money transfer etc, do you have any idea on postage to queensland, doesnt matter how much really
do you have any more lights
lol clearly i was interested, oh well you can take it :roll:

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Wed Aug 31, 2011 8:50 pm
by Connor_1994
i didnt evan see your post, lol,
sorry man, im after a set, to modify them and see how i go at making some project f lights (:

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Sat Sep 03, 2011 1:56 am
by EscapingFate
Passenger tail light you dont want to be honest...its leaky... and i couldnt seem to find the hole in it unless you feel like ovening it and pullilng it apart then putting it back together... not worth the time to b e honest..

attention NSW seagulls- parts from escapingfate's fto

Posted: Sat Sep 03, 2011 7:40 am
by bass_twitch
EscapingFate wrote:Passenger tail light you dont want to be honest...its leaky... and i couldnt seem to find the hole in it unless you feel like ovening it and pullilng it apart then putting it back together... not worth the time to b e honest..
But hel be using it as a template so of course hel be pulling it out :lol:

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Sun Sep 04, 2011 10:26 pm
by Connor_1994
exactly :D

pulling it apart, modifying it and sealing it (:
we shall see how i go at getting close to project f lights, haha (:

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Tue Sep 27, 2011 9:25 pm
by renzkuken1
steering wheel sold yet?
I'm keen.

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Thu Sep 29, 2011 12:37 pm
by millsy
Manual box? (i dont need any of the conversion stuff, 1gear of mine doesnt work, tranny guy said to scrap it) so even just the internals of the tranny if that equals a decent discount ($250 for the insides?)

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Thu Sep 29, 2011 7:36 pm
by RALLiART_FTO
I need backseat and the carpet in the boot, please pm me prices

Re: attention NSW seagulls- parts from escapingfate's fto

Posted: Thu Sep 29, 2011 11:35 pm
by renzkuken1
millsy wrote:Manual box? (i dont need any of the conversion stuff, 1gear of mine doesnt work, tranny guy said to scrap it) so even just the internals of the tranny if that equals a decent discount ($250 for the insides?)
Sorry i bought the whole manual conversion for $400 :twisted: