evo vs fto
Posted: Tue Nov 27, 2012 8:26 pm
been doing a bit of reading around here and on the net and want to know what parts suspension brakes control arms etc does the fto have in common with the evo models.
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://ftoaustralia.com/v3/
evo vs fto
Page 1 of 1
Re: evo vs fto
Posted: Tue Nov 27, 2012 8:53 pm
All I know is that rear dog bones are the same as evo 1-3
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:03 pm
ive heard that also in the engine mount diy i read that the engine mounts are the same as evo not sure what model
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:20 pm
Evo 3 I think. I bought them sometime back.
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:25 pm
what about brake calipers disc sway bars ??/
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:27 pm
Bennoz changed over to evo brakes, so I guess he is the best man to get you the details. 
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:33 pm
im just curious as to what parts are shared between the 2 bennoz were you hiding 
Re: evo vs fto
Posted: Tue Nov 27, 2012 9:55 pm
it was all evo 5 gear that bolted up mate
Re: evo vs fto
Posted: Tue Nov 27, 2012 10:07 pm
im not after what bolts up to the fto but what parts off the fto are the same as evo models there would be a fair bit of parts that would be the same i would assume
Re: evo vs fto
Posted: Wed Nov 28, 2012 5:47 am
FTO GPX brakes are identical to Evo iii..
I am told control arms and suspension is too. I haven't confirmed.. But may look at putting the FTO Tein's on my iii..
I am told control arms and suspension is too. I haven't confirmed.. But may look at putting the FTO Tein's on my iii..
Re: evo vs fto
Posted: Wed Nov 28, 2012 6:28 am
FTO's are a bitza. They share some Evo stuff, some Lancer/Mirage stuff & quite a bit of Magna stuff.
Anything in particular you're looking for?
I made Evo V brakes fit, but that also required control arms & hubs..
viewtopic.php?f=10&t=26018
Anything in particular you're looking for?
I made Evo V brakes fit, but that also required control arms & hubs..
viewtopic.php?f=10&t=26018
Re: evo vs fto
Posted: Sat Dec 08, 2012 2:22 am
And Volvo stuff, toyota stuff, dodge stuff.Bennoz wrote:FTO's are a bitza. They share some Evo stuff, some Lancer/Mirage stuff & quite a bit of Magna stuff.
Anything in particular you're looking for?
I made Evo V brakes fit, but that also required control arms & hubs..
viewtopic.php?f=10&t=26018
Eg. PCV grommet at Mitsubishi is $40.00. Go to Toyota, it's exactly the same and its $11.00.
Re: evo vs fto
Posted: Sat Dec 08, 2012 6:44 am
And a hyundai excel I found out for the reverse gear sensor 
Re: evo vs fto
Posted: Sat Dec 08, 2012 7:35 am
All Excels have Mitsi running gear. Donks are a rebadged 4G15ZFL45H1 wrote:And a hyundai excel I found out for the reverse gear sensor
As do all Proton Satria & Wiras!
Re: evo vs fto
Posted: Fri Jan 04, 2013 1:18 am
I couldn't get a match for lower control arm bushes from another Mitsubishi make. Had to go through Mitsubishi! They were cheaper as well?
Re: evo vs fto
Posted: Wed Feb 20, 2013 8:19 pm
Don't the tiburon have the same block??
Re: evo vs fto
Posted: Wed Feb 20, 2013 9:38 pm
Perdana