Page 1 of 1
Indicator/Hazard not working
Posted: Thu Jan 10, 2013 5:15 pm
by illmotion
I changed my taillight bulb this morning and after that the indicator don't do anything when I move the stalk and whenever I press the hazard light nothing as well, I done a search on the forum and people say it either in limp mode or fuse has blown? If so what the fuse I have to replace?
Hope I don't get pulled over driving home from work... It was working when I left the house but suddenly died after a few turns lol
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 5:19 pm
by PHIL069
Interior fuse #4....
- fuse25um.jpg (86.82 KiB) Viewed 267 times
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 5:22 pm
by PHIL069
Could also check #7 under the bonnet
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 6:50 pm
by mattman
ive been looking for a ages to find those fuse box diagrams in English thanks for sharing buddy
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 7:10 pm
by illmotion
Cheers mate! Got my friend to get me some 10a fuses hopefully that fixes the problem.
I think there a translated fuse box sticky post somewhere on this section :p
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 7:16 pm
by dstocks
ive been looking for a ages to find those fuse box diagrams in English thanks for sharing buddy
Have to say you cant have tried really hard. Have 2 different versions (including those) on Complete FTO.
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 7:37 pm
by JaseNZ
PHIL069 wrote:Interior fuse #4....
fuse25um.jpg
PHIL069 wrote:Could also check #7 under the bonnet
Hmm, these could come in handy, thanks!
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 7:41 pm
by silverGPX
I normally end up testing every single fuse with a multimeter lol
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 7:46 pm
by PHIL069
I got to help out a whole bunch of members with someone else's work/pics
*Should look into getting stickers of these pics made to stick in our fuseboxes*
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 8:19 pm
by mattman
i was searching google for the fuse boxs in English then found this site and forgot about it
Re: Indicator/Hazard not working
Posted: Thu Jan 10, 2013 10:25 pm
by payaya
silverGPX wrote:I normally end up testing every single fuse with a multimeter lol
Ha me too!
Re: Indicator/Hazard not working
Posted: Fri Jan 11, 2013 5:12 pm
by illmotion
Alright so both of those fuse were the problem, when I put in new ones they blew straight away any reason why?
Re: Indicator/Hazard not working
Posted: Fri Jan 11, 2013 5:23 pm
by illmotion
illmotion wrote:Alright so both of those fuse were the problem, when I put in new ones they blew straight away any reason why?
Disregarded this question, it cause one of the cable got damaged during the blown fuse
But now indicators don't come on when central locking/Alarm is used
Re: Indicator/Hazard not working
Posted: Fri Jan 11, 2013 5:34 pm
by PHIL069
illmotion wrote:illmotion wrote:Alright so both of those fuse were the problem, when I put in new ones they blew straight away any reason why?
Disregarded this question, it cause one of the cable got damaged during the blown fuse
I would say the wire is what caused your fuses to blow.
Lucky the car has fuses or you could have had a fire
Now fix that wire
Re: Indicator/Hazard not working
Posted: Fri Jan 11, 2013 7:17 pm
by illmotion
Yep that wire and everything all good to go now apart from the flash when use my central locking but other then that all good!
thanks for your help