Page 1 of 2
Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 6:12 pm
by renzkuken1
I have put another engine into my gpx fto. It is the same type as the previous one just a different engine number. How do i go about getting it updated with RTA?
I'm asking because i am interested in selling it and buyer wants that done before i sell it.
Also does anyone have a set of break pads for the front of the Gpx i could buy?
Thanks everyone.

Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 6:42 pm
by aza013
You need to get it checked by a blue slip place, they only look for the engine number. They then fill out the forms and you take that to the RMS and they update their system. Job done.
The RMS (RTA) will have a list of places you can take it to on heir web site that are around your area.
Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 8:09 pm
by renzkuken1
Thanks man.

Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 8:16 pm
by renzkuken1
What are some average brake pads i can buy for the front and put on myself? For my gpx that is.
Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 8:19 pm
by aza013
If you want just good cheap pads bendix would be the go.
Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 9:02 pm
by renzkuken1
What price would i be looking at for just the front pads?
Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 9:06 pm
by Sahin
$70 - $90
Re: Question about engine and brakes NSW
Posted: Sat Feb 16, 2013 9:07 pm
by Taz
Ebay lists them as 120 front, 65 rear not sure if theyre the same as store prices
EDIT: ^ there ya go, sounds a bit more accurate
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 1:28 am
by renzkuken1
Thanks guys.
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 1:56 am
by renzkuken1
Does anyone have a set i could purchase off them?
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 7:22 am
by rock_it
You will need to take proof of purchase of the engine to the blue slip guy as well.
As for pads, just go to any brake shop. Repco should have them as well.. be much quicker than waiting on the forums..
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 9:42 am
by renzkuken1
ok cheers,
i was going to purchase them from here.
http://www.japanesemotorspares.co.uk/pr ... brake-pads
Do front rotors fit on the back?
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:08 am
by PHIL069
No, front rotors are bigger than rear one's.
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:22 am
by renzkuken1
kk thanks all.
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:30 am
by renzkuken1
Is $250 for grooved + slotted rear rotors with 4 brake pads for rear and 4 brake pads for front a good price delivered??
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:40 am
by Retsub
Thaught you were selling it.
Why are you replacing the rotors if you are selling it
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:47 am
by renzkuken1
Guy who is buying it wants me to lol
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:49 am
by Taz
I have the rotors that came off my GPR when i swapped them out for my new ones. Have pads too that have plenty of meat, id say 80% +. They were my spare set. Don't have rears though.
$20 and their all yours
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:57 am
by renzkuken1
Ok thanks man.

That would be fantastic.
Hmm when would i be able to pick them up?

Message me your address again. 0404103422
Re: Question about engine and brakes NSW
Posted: Sun Feb 17, 2013 10:59 am
by Taz
Bit of a long way to pickup id say - Im in brissie - would be no more than $20 postage - id say closer to 15