Page 1 of 1
Version R spring rates?
Posted: Wed Dec 10, 2014 5:49 pm
by Herron
Does any one know the version R spring rates? or a close estimate to what they would be?
I can't find anything on them.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 5:53 pm
by Daniel2019
You didn't look very hard
Bennoz wrote:You can have springs made relatively cheaply. All you need is an old spring, the height you require & a spring rate.
Standard is 2.6kg/m front & 1.6kg/m rears. Try companies like Eibach - their springs are cold rolled too, superb construction.
http://www.eibach.com.au
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:00 pm
by Herron
So both a GPX and a GPvR have the same spring rate then?
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:07 pm
by Daniel2019
Pretty sure they do. What do you need the info for? If they are different then it wouldn't be by all that much.
I'm guessing that the only variation would be the Nakaya tune which had Ohlins shocks, so that would be likely to have slightly different spring rates possibly, but I'm not 100% sure.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:10 pm
by Herron
Im thinking about going coil overs, so i wanted to know the stock spring rate.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:32 pm
by rock_it
Didn't the vR come out with Tein Coilovers... That were usually removed when compliance got done?
So spring rate could actually be different.. Maybe a little stiffer..
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:40 pm
by Daniel2019
rock_it wrote:Didn't the vR come out with Tein Coilovers... That were usually removed when compliance got done?
So spring rate could actually be different.. Maybe a little stiffer..
Where'd you hear that? I've never heard that before
Interesting if they did.. if they did get pulled out for compliance then they should be given to whoever bought/imported the car.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 6:55 pm
by Vectose
Nah, didn't come with Teins. But they did come with uprated shocks and springs. Different part numbers to the GPX/GR variants.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 7:05 pm
by Shhtuart
If you can wait 5 days I'll tell you exact specs from the actual booklet.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 7:06 pm
by Daniel2019
There we go then. Either way, just get adjustable coilovers and go softest setting for street use.
Had a set of Cusco's before. Loved them. Delivered pizza in my FTO that had them actually.
Couple of the guys love the BCs as well, and Teins are pretty popular too.
Re: Version R spring rates?
Posted: Wed Dec 10, 2014 8:25 pm
by rock_it
Hmmm.. I thought so..
Pretty sure Dwayne's came with Tein... And the ones I got were meant to be out of a vR as well.. But meh, probably just me being wrong..
Re: Version R spring rates?
Posted: Thu Dec 11, 2014 11:37 am
by Bennoz
Dwayne's came with Tein HA's. Not the coilovers, the shock / spring combo that ended up in my car for years. Recently binned.
Re: Version R spring rates?
Posted: Thu Dec 11, 2014 11:40 am
by rock_it
Bennoz wrote:Dwayne's came with Tein HA's. Not the coilovers, the shock / spring combo that ended up in my car for years. Recently binned.
Ahah ... Well there you go ...
