FTO AUSTRALIA

heys guys i have a gr, am considering purchasing a kn air filter and maybe get a nice shiny stainless steel pipe leading to it and maybe from it to somewhere in the front bar

Anyways

Is their anything i should know about doing this type of job i want to get some sort of gain, as i will be adding cat back exhaust prob 2.5 all the way through mandrel bent and extractors followed by chip and tune

what do ya think

Also from stock as a rock how much diference will their be after i do these mods.

Cheers

best to search the forums there are lots of recomendations here already...


also where are you... will help people recommend performance shops

in brisbane

Airpod, with a good cold air intake will probably give you 4 to 8 kw (atw)

Depending on what exhaust you get, pretty much, cat back will be around 6 to 10 kw atw i reckon, high flow cat, maybe 1 to 2 kw,

full exhaust with highflow cat, and extractors will probably give you roughly 15+kw or something like that... dono, all depends on what u get...

doesn't sound to much, but it's still good for an NA engine. check out some of the UAS www.nismo.com.au mods for the FTO.

When you say "a good" cold air induction system what do you mean

Thanks for the responses

The guys on this site that have managed to get quite a bit out of a gr with these mods which parts did they use, filter, exhaust. I was think bout getting the extractors from rpw that includes the flex join is this a good option.

hmm.. i'm not saying this is a good, because i wrote one of them, (cos if i do then that would be prasing my self ) but anyway, have a look at these:

>> http://www.ftoaustralia.com/modules.php ... pic&t=4117

>> http://www.ftoaustralia.com/modules.php ... pic&t=1951

I wrote a review on the RPW extrator a while back, but it was on Tip GPX, if you interested the link is below

http://www.ftoaustralia.com/modules.php ... +extractor