FTO AUSTRALIA

Ok doods.

I was gonna help Ken with his dials and I notice a few PMs about spark plugs and leads...lets do them all at max' place.

I have the spark plug tool etc and all the equipment...I will need to fit my leads also when they come.

Who's down?

khunjeng wrote:...lets do them all at max' place.

hahaha,
I guess I have to be in it then,
Since you invite yourself mate, why dont you advice us the date/time as well

all good, everybody more than welcome as long us your car doesnt leak oil to my drive way,

btw, does onyone experienced on how to do the tappets? we might create the diy for that as well in the same time,

i'll join in. need to fix my centre dials and the leads when they come in. make it a weekend day , can make it a bbq day too

shue wrote:i'll join in. need to fix my centre dials and the leads when they come in. make it a weekend day , can make it a bbq day too

just mentioned this to the gf,
she asked "who will wash the dishes?"
I said Shue
hahahaha

Cool I'm down as well coz I'm only 4 mins down the road. I can bring some meat if you like.

Chris you can help me do the LEDs in the dash like you told me you would ages ago........hehehe

Which is ideal coz you could go to autobarn/supercheap/repco with me which are all 5 mins down the road.

Oh and Ken you can show me where that motherf*cker relay goes so I won't burn out a 3rd foglamp switch!

just mentioned this to the gf,
she asked "who will wash the dishes?"
I said Shue
hahahaha

lol no way. i'll help wash the dishes if u help me fit my damn leads and plugs :p. when are we doing this btw?

yeah I can do r dails the same as mine and show you what to do if u wanna change them next time...also we can all do the plugs/leads incase anyone needs some help...don't mind the wife will be away. yay

if it's an open invite i'll come along
is it gonna be B.Y.O. gasket?

i'll be doin mine out in the street though... its droppin oil

S1LVERFISH wrote:if it's an open invite i'll come along
is it gonna be B.Y.O. gasket?

i'll be doin mine out in the street though... its droppin oil

next door is empty land, I was planning to put some of the cars there,
everybody is welcome, however, there will be time restrictions, lets say 3 hrs max, it will start early in the morning lets say 9am, I will fire up the bbq as well, sausages are from me,
you guys can get me a bottle of scotch

if anyone needs a gasket, I might be able to get it from mitsu werrebie

mxysxy wrote: if anyone needs a gasket, I might be able to get it from mitsu werrebie

The whole kit for GPX? & how much?

inlet manifold gasket only

Bennoz wrote:MD175776 - gotta come from Mitsibishi. Its not expensive thou... bout $18 bucks from memory.

sounds like fun.

nacho 5 min away. me 10min away Hey joel... i know i have a relay, but i would not have a clue howd its installed nor where... but your more than welcome to look for it provided u promise me i wont have cables everywhere afterwards heheh - jk.

but yes... a date and time please

ps: anyone wanna trade cars for a couple hrs or so on the day, different car, different feel, hehehez j/k j/k

FTO338 wrote:

mxysxy wrote: if anyone needs a gasket, I might be able to get it from mitsu werrebie

The whole kit for GPX? & how much?

$22 I bought one recently and installed it when I did my plugs.

rnbboi wrote:sounds like fun.

nacho 5 min away. me 10min away Hey joel... i know i have a relay, but i would not have a clue howd its installed nor where... but your more than welcome to look for it provided u promise me i wont have cables everywhere afterwards heheh - jk.

but yes... a date and time please

ps: anyone wanna trade cars for a couple hrs or so on the day, different car, different feel, hehehez j/k j/k

wont be hard to work out mate.

does everyone wanna replace their plugs also? basically if u have a socket set u need (from memory) a 15mm and 17mm socket to get all the bits of the inlet manifold.

who has the plug tool for the plugs? I do...hehehe this doesn't take long.

Should take longer than about 2hrs. Took me longer last time cos I did the fuel filter also which is a bitch - I"M NOT DOING THAT AGAIN!

khunjeng wrote:

FTO338 wrote:

mxysxy wrote: if anyone needs a gasket, I might be able to get it from mitsu werrebie

The whole kit for GPX? & how much?

$22 I bought one recently and installed it when I did my plugs.

$22 for the head gasket or gasket kit which including intake manifold & TB?

Did I hear that Chris was gonna help me do the fuel filter as well?

AWESOME!!!!!

so when we doing this? how bout next weekend?

shue wrote:so when we doing this? how bout next weekend?

jee, I better send my short leads back asap then

do it, turn around is pretty fast. i sent mine last thursday and got mine back yesterday.

shue wrote:do it, turn around is pretty fast. i sent mine last thursday and got mine back yesterday.

I hvan't got my leads yet so I wont wanna do it until then....