BC BR setup
Posted: Fri Dec 27, 2013 12:22 pm
What settings related to preload are you guys running? I was going to use 4mm preload like this vid: http://www.youtube.com/watch?v=HlqOA35NmAw
Any suggestions?
Any suggestions?
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://ftoaustralia.com/v3/
BC BR setup
Page 1 of 2
Re: BC BR setup
Posted: Fri Dec 27, 2013 1:10 pm
Mines just standard off the shelf specs
Re: BC BR setup
Posted: Fri Dec 27, 2013 1:12 pm
Just put them on? Didn't do any adjustments? hmm... I could move the springs around with my hand..so I thought preload was not properly set.
Re: BC BR setup
Posted: Fri Dec 27, 2013 1:13 pm
Oh fair enough mine where stiff as I couldnt move any part of them thats weird how that's happen
Are they all the one units when u got them or apart
Are they all the one units when u got them or apart
Re: BC BR setup
Posted: Fri Dec 27, 2013 2:15 pm
All together. Rob (Vectose) confirmed as long as the springs don't have up and down movement then I should be all right.
What hardness/softness settings are you running on yours?
What hardness/softness settings are you running on yours?
Re: BC BR setup
Posted: Fri Dec 27, 2013 5:54 pm
Thats a good question lol are you talking about the top you can adjust if so
Both from soft turn front 12 clicks to hard and rear 14 clicks
I find its a nice ride like that.
Spring rates I dont know what they are just what ever standard is
Both from soft turn front 12 clicks to hard and rear 14 clicks
I find its a nice ride like that.
Spring rates I dont know what they are just what ever standard is
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:19 pm
Yeah those ... I have got standard spring rates as well.ZFL45H1 wrote:Thats a good question lol are you talking about the top you can adjust if so
Both from soft turn front 12 clicks to hard and rear 14 clicks
I find its a nice ride like that.
Spring rates I dont know what they are just what ever standard is
Aren't you supposed to go from hard 0 to soft while changing those settings? I have got them at rear 20 and front 15... 0 being hardest, 30 being softest. Yet to put my front ones in though
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:21 pm
Set 0 preload by winding top adjuster down so that the spring has a smidgeon of play, like u can move the spring a tiny tiny bit in its perch with force.
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:21 pm
Even a tiny bit of preload adds bouncy ness
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:22 pm
Bennoz wrote:There's no preload to adjust. They're not like Teins, the lower cup under the spring is supposed to be a 'neat' fit against the spring. Just tight enough so there's no slap, yet you can still turn the spring in it's place.Vectose wrote:Hey mate, just wondering if you set the spring preload on the BC cpilovers or if you are running them how they came out the box?
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:24 pm
Shout me a carton and I'll install the lot sidds
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:25 pm
I'll help for free
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:28 pm
I'm more 1337 
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:29 pm
Lol at leet
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:37 pm
Get your ass back from melbourne firstSahin wrote:I'll help for free
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:39 pm
I'm back on the 5th lol f**k melbourne
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:46 pm
LMAO!!!Sahin wrote:I'm back on the 5th lol f**k melbourne
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:48 pm
Anyone need anything from Dwayne on the way back lol
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:49 pm
I need something from MelbourneSahin wrote:Anyone need anything from Dwayne on the way back lol
Re: BC BR setup
Posted: Fri Dec 27, 2013 7:50 pm
Me? Lol