Page 1 of 1
calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:07 pm
by MOR31
hey guys. need your help. i have a viscous lsd in my gearbox and need a new shaft, the original shaft was stuffed and thrown out. its proving impossible to find the shaft anywhere so was hoping some one could help me out if the know the part numbers or have one in their fto an wouldn't mind sharing the vin with me so i can find it using the Mitsubishi data base
Re: calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:22 pm
by PHIL069
PHIL069's 95 FTO GPX
Welcome to my ride.
What it has so far.......
-Viscous LSD...
DE3A0015318
You're welcome
Re: calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:24 pm
by MOR31
thanks mate, and that was an option put in the car from factory?
sorry to be anal but its what mitsubishi told me to check
Re: calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:48 pm
by PHIL069
As far as I know all the numbers on my car match from factory.
I'm sure I did a VIN decode years ago which showed the numbers, not Complete FTO, an overseas site.
But I can't be 100% sure.
These are the "complete axle" part numbers that come up with my VIN#
RH = MR196436
LH = MR196435
Re: calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:51 pm
by PHIL069
Actually I believe I done my VIN# search at Mitsubishi Japan site.
I don't have time to research tonight, but I might get time to research tomorrow.
Re: calling all viscous lsd owners
Posted: Tue Feb 11, 2014 9:56 pm
by MOR31
thanks heaps, ill see what those numbers bring up tomorrow
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 12:01 am
by SchumieFan
Mine is def factory standard... let me know if Phils doesn't pull the right numbers
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 7:50 am
by Bennoz
Mike, do you want to flick me your VIN? Your's will have the viscous LSD. CAPS/ASA only narrows it down to the full 'joint kit', but that would be a start.
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 6:10 pm
by SchumieFan
DE3A0019068
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 7:51 pm
by Bennoz
Hmmm, based on that chassis number, ASA is wrong.
It's feeding me the same part number for both sides: MR232222. Which makes no sense as we know both are different.
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:16 pm
by Technikhaus
Odd, it shows different PNCs but then the same part number but different part names...
- asajoint.PNG (7.78 KiB) Viewed 512 times
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:17 pm
by SchumieFan
Yeah that's weird... unless it's for a set? Unlikely... know where the part number would be on the shaft?
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:26 pm
by SchumieFan
Try this one... a manual COTY built the same week.
DE3A0019005
Or this... The last COTY built:(auto)
DE3A0019836
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:30 pm
by Technikhaus
Same result as before.
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:31 pm
by Bennoz
Yup, same same
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 8:32 pm
by SchumieFan
this is fucked! if it wasnt dark id go measure them LOL
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 10:23 pm
by Bennoz
SchumieFan wrote:this is fucked! if it wasnt dark id go measure them LOL
We know the measurements, we need the part numbers!
Re: calling all viscous lsd owners
Posted: Wed Feb 12, 2014 10:55 pm
by Shhtuart
Re: calling all viscous lsd owners
Posted: Sun Jun 08, 2014 4:38 am
by MOR31
Any more luck guys.