Group buy: Fto bonnet & boots

Astron_Boy · Post by **Astron_Boy** » Mon Feb 16, 2009 1:04 pm

tenji wrote:Wings are 399 + postage

Sent you 50%, you have email.

Thanks.

Come on everyone, pay up pay up, my names lookin lonely on the list

and I want 5% so I can spend it on.... freddo frogs.

tenji · Post by **tenji** » Tue Feb 17, 2009 3:57 pm

updated.

please remember guys that it usually takes a day for money to clear into my account and to save it to the last minute.

thanks,

Polo

Post by **I8A4RE** » Wed Feb 18, 2009 8:22 am

GUYS CUT THE GARBAGE, gibberish corner is

way

BOT

Ok i cant be bothered reading back through the crap.

Do you have bonnets made just out of fibreglass? If so how much, I might be interrested now

Astron_Boy · Post by **Astron_Boy** » Fri Feb 20, 2009 5:18 pm

Email sent.

silverphoenix · Post by **silverphoenix** » Sun Feb 22, 2009 12:15 am

Hmm.... really want the vented bonnet... might have to make a trip to the bank on monday...

tenji · Post by **tenji** » Mon Feb 23, 2009 11:52 am

Yes fibreglass one can be made.

Sorry guys for a late response ive been out cold with food poisoning and been slowly recovering.

nvr2low · Post by **nvr2low** » Mon Feb 23, 2009 4:02 pm

ouch man that sucks hope ya better. Um does the postage of the items comes with insurance as my mates have had bonnetts broken in freight

tenji · Post by **tenji** » Mon Feb 23, 2009 4:26 pm

Hey mate yeah we insure them

nvr2low · Post by **nvr2low** » Mon Feb 23, 2009 5:41 pm

ok sweet man will save my pennys for that cut off date bit hard with all this great stuff coming up and changing motors

Astron_Boy · Post by **Astron_Boy** » Mon Feb 23, 2009 7:43 pm

I'm curious Tenji.
No chance in heck at buying them currently.
But could your guy make the external mirror cups and base piece out of CF?

J · Post by J » Mon Feb 23, 2009 9:06 pm

^^^ +1

I knew waiting to change my mirrors would pay off.... If you can get these done, ill be the first to pay dead set!

tenji · Post by **tenji** » Tue Feb 24, 2009 9:30 am

Hey guys remind me after the group buy and ill see what i can do

I may need a a donor for a mould to be made though.

Astron_Boy · Post by **Astron_Boy** » Tue Feb 24, 2009 9:35 am

tenji wrote:Hey guys remind me after the group buy and ill see what i can do

I may need a a doner for a mould to be made though.

I was going to buy a set of mirrors and remove the electrics to install in the CF made ones,
So I could prob provide donors.

Hopefully I have money by then to buy them

Ferrus · Post by **Ferrus** » Sun Mar 01, 2009 10:33 pm

Whoops. I tried to transfer the funds electronically but i set the daily limit too low. will fix it up tomorrow so you will have payment deposit for a carbon fiber boot by wed at latest.

Ta

tenji · Post by **tenji** » Mon Mar 02, 2009 11:12 am

no probs mate please put your nick and boot as reference.

Astron_Boy · Post by **Astron_Boy** » Mon Mar 02, 2009 12:20 pm

I dont suppose when my boot is made, they could predrill the holes for the vr wing?
Feelin real sketchy about drilling into the carbon.

tenji · Post by **tenji** » Mon Mar 02, 2009 12:36 pm

ill see what i can do for ya mate.

Ferrus · Post by **Ferrus** » Sun Mar 08, 2009 1:21 am

how come i am not updated yet? =(

tenji · Post by **tenji** » Sun Mar 08, 2009 12:30 pm

sorry mate now updated

Ferrus · Post by **Ferrus** » Sun Mar 08, 2009 1:50 pm

hey tenji i think u should know that you should change the end date on the 1st page to the 14th of march(which is listed in the 2nd pg..) instead of 28th of feb.. just as a suggestion =)