Body kit parts wanted
Moderators: IMC, Club Staff
- Sweep
- Grease Monkey
- Posts: 379
- jedwabna poszewka promocja
- Joined: Wed Jul 07, 2010 7:42 pm
- Location: QLD
Body kit parts wanted
Hi im loooking to respray my car at some point in the hopefully not to distant future and I was thinking I might like to add a body kit to it before hand.
I do not want to spend a small fortune on the kit so I was hopeing to pick up some used parts, im after things like front / rear bars, side skirts, rear spoiler, bonnet.
I would pretty much consider any custom parts at this stage, and I can pick up any where between sydney to the goldcoast and have cash waiting.
Thanks Andy
I do not want to spend a small fortune on the kit so I was hopeing to pick up some used parts, im after things like front / rear bars, side skirts, rear spoiler, bonnet.
I would pretty much consider any custom parts at this stage, and I can pick up any where between sydney to the goldcoast and have cash waiting.
Thanks Andy
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Body kit parts wanted
I got black stock sideskirts.. In Sydney..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke![]()
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
![]()
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Body kit parts wanted
i have a veilside front bar, if u have a 97' model facelift bar i would swap?
- Sweep
- Grease Monkey
- Posts: 379
- Joined: Wed Jul 07, 2010 7:42 pm
- Location: QLD
Re: Body kit parts wanted
Hi sorry my bad I should of mentioned im only after aftermarket body parts, but thanks anywaysrock_it wrote:I got black stock sideskirts.. In Sydney..

No im aftraid I dont.silverGPX wrote:i have a veilside front bar, if you have a 97' model facelift bar i would swap?

- Shhtuart
- Forum Moderator
- Posts: 1747
- Joined: Sun Aug 05, 2007 5:00 pm
- Location: Melbourne
- Contact:
Re: Body kit parts wanted
I have a damaged white veilside front.
It's genuine and the bottom lip section is cracked and in two parts.
The top section is fine.
I bought a fibreglassing kit which I'd part with if you wanted the whole front bar for $150.
I can post pics if you want.
EDIT: The fibreglasing kit cost $55 + the fibreglass reinforced filler cost $20 = $75.
It's everything you need to fix it. It's just been too cold in Melbourne to mix fibreglass resin.
It's genuine and the bottom lip section is cracked and in two parts.
The top section is fine.
I bought a fibreglassing kit which I'd part with if you wanted the whole front bar for $150.
I can post pics if you want.
EDIT: The fibreglasing kit cost $55 + the fibreglass reinforced filler cost $20 = $75.
It's everything you need to fix it. It's just been too cold in Melbourne to mix fibreglass resin.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Body kit parts wanted
Ive got a Kaze front bar with indicators. They normally retail for a LOT though (around 2K), so the $700 im asking is cheap, but probably not cheap enough for what you are looking for.
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you

If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- Sweep
- Grease Monkey
- Posts: 379
- Joined: Wed Jul 07, 2010 7:42 pm
- Location: QLD
Re: Body kit parts wanted
If you could post a couple pics that would be great.Shhtuart wrote:I have a damaged white veilside front.
It's genuine and the bottom lip section is cracked and in two parts.
The top section is fine.
I bought a fibreglassing kit which I'd part with if you wanted the whole front bar for $150.
I can post pics if you want.
EDIT: The fibreglasing kit cost $55 + the fibreglass reinforced filler cost $20 = $75.
It's everything you need to fix it. It's just been too cold in Melbourne to mix fibreglass resin.
Dstocks; If I win the lotto I will let you know

Thanks
Andy
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Body kit parts wanted
omg a kaze, i want.
Do you have any pictures?
Do you have any pictures?
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Body kit parts wanted
dstocks wrote:
I have a Kaze front bar including indicators im happy to part with. Looking for $700. Considering the indicators normally cost 400 by themselves and the bar around $1500, this is a pretty low price.
Heres a pic....

Taz wrote:When funds allow
- brad_gpx
- Veteran Mechanic
- Posts: 1128
- Joined: Mon Aug 17, 2009 5:00 pm
- Location: central coast
Re: Body kit parts wanted
I love the kaze front bar. It's so nice
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
- brad_gpx
- Veteran Mechanic
- Posts: 1128
- Joined: Mon Aug 17, 2009 5:00 pm
- Location: central coast
Re: Body kit parts wanted
I think they're really boy racerish but I can't not like them. If I didn't like them I think I would probably hate them
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Body kit parts wanted
I don't dislike them, just not my taste, but I can see how you like them......... I think

Taz wrote:When funds allow
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
Re: Body kit parts wanted
WTF?brad_gpx wrote:If I didn't like them I think I would probably hate them

CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
- brad_gpx
- Veteran Mechanic
- Posts: 1128
- Joined: Mon Aug 17, 2009 5:00 pm
- Location: central coast
Re: Body kit parts wanted
Okay I have no idea what I meant by that
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Body kit parts wanted
I8A4RE wrote:WTF?brad_gpx wrote:If I didn't like them I think I would probably hate them



Taz wrote:When funds allow
- Shhtuart
- Forum Moderator
- Posts: 1747
- Joined: Sun Aug 05, 2007 5:00 pm
- Location: Melbourne
- Contact:
Re: Body kit parts wanted
I can see this going off topic quickly.
Sweep ill have pics up in a couple of days im a bit busy atm.
Sweep ill have pics up in a couple of days im a bit busy atm.
- Sweep
- Grease Monkey
- Posts: 379
- Joined: Wed Jul 07, 2010 7:42 pm
- Location: QLD
Re: Body kit parts wanted
Ok noworries ill wait to hear back from you.
Yea im not a big fan of the kaze front bar but I think being suited to the right body kit helps.
Thanks
Andy
Yea im not a big fan of the kaze front bar but I think being suited to the right body kit helps.
Thanks
Andy
- bushido
- Oldtimer
- Posts: 1566
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Sydney
Re: Body kit parts wanted
I have a set of DC skirts if youre interested?
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
###########Unofficially the loudest FTO in NSW???##########
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
###########Unofficially the loudest FTO in NSW???##########
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%