idleing revs

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
hhakan
Grease Monkey
Posts: 115
jedwabna poszewka promocja
Joined: Tue Nov 02, 2010 11:32 pm
Location: Sydney - berela

idleing revs

Post by hhakan »

im not too shore but im being told it should be close to the 1-1.1 thousand revs. but in my case it has a mind of its own i think. most of the time when i start my car up in the mornings i have to accelerate since it just stalls untill it warms up. then once the stalling stops and the car warms up it idle at 500??? then if a thrash it a bit(while driving) and stop, it idles at 1.5 on neutral and 2.5 when i put it in park??? a mechanic showed me where lower and higher the revs. he showed me the screw on the engine. but it just doesent really do much.
im thinking my choke on the car is dead. can i get some help :idea:
User avatar
Dras
Mechanic
Posts: 584
Joined: Wed Jul 26, 2006 5:00 pm
Location: Castle Hill, Sydney
Contact:

Re: idleing revs

Post by Dras »

User avatar
bduffman
Oldtimer
Posts: 1450
Joined: Sun Jan 31, 2010 6:00 pm
Location: gosford
Contact:

Re: idleing revs

Post by bduffman »

http://cgi.ebay.com.au/MITSUBISHI-2L-2- ... 45ea6a8fc7
i bought mine threw them pretty easy to put in take 10 to 20 mins
azn367
Apprentice
Posts: 34
Joined: Tue Aug 24, 2010 2:02 pm

Re: idleing revs

Post by azn367 »

hey man, have you fix the car? cause im having sorta the same problems with my fto...when i stop or give way my rev counter goes to 0 and the car shuts down... if u have fix your car how much did it cost? thanks
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Re: idleing revs

Post by vipfto »

stepper motor mate, try a search its real common issue but easy fix
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
hhakan
Grease Monkey
Posts: 115
Joined: Tue Nov 02, 2010 11:32 pm
Location: Sydney - berela

Re: idleing revs

Post by hhakan »

Changed my stepper motor. Fixed now.
But I changed the whole throttle body because it was cheaper
Post Reply