Last bits- doors, suspension, brakes, exhaust, rear brace

djjones · Post by **djjones** » Wed Oct 12, 2011 1:40 pm

Just sold my FTO (thanks taz) so wont be needing any of these spare bits now, i have:

- both doors
- boot lid
- rear struts (the ones off my old one, so 280kms on them)
- front struts (the ones off cams fto, so only 85kms on them)
- radiator (dont know how good it is but i ran water through it at low pressure no leaks)
- front bit of exhaust (between the heads and the cat)
- brake calipers (i think)
- rear strut brace
- the whole big front end thing

i hope the pics work this time

* Borepyano: Fixed

Post by **BorepYano** » Wed Oct 12, 2011 2:10 pm

Where abouts are you?
is the paint colour the normal red? it looks kinda metalic/orange in the photos (could be just the lighting though)

might be interested in the drivers door.

its_the_driver · Post by **its_the_driver** » Wed Oct 12, 2011 5:47 pm

Hey buds,
Can I get a quote for both doors & boot.
To 3977 Victoria.
Cheers

its_the_driver · Post by **its_the_driver** » Wed Oct 12, 2011 5:50 pm

Sorry to post twice, but also the 2 brakes, are they front, they look it? and strut brace also how much for this??
Would you do a bulk sale of parts?
Thanks

spetz · Post by **spetz** » Wed Oct 12, 2011 6:20 pm

Was your FTO non-MIVEC?
How come your front swaybar links to the LCA rather than the struts?

Post by **Bennoz** » Wed Oct 12, 2011 8:54 pm

spetz wrote:Was your FTO non-MIVEC?
How come your front swaybar links to the LCA rather than the struts?

Version R, thats why.

spetz · Post by **spetz** » Wed Oct 12, 2011 9:31 pm

ah I see
And what mm is it? 20mm?
Of what I understand though linking the swaybar to the struts makes it more effective?

phi-tec · Post by **phi-tec** » Wed Oct 12, 2011 10:12 pm

yo how much for rear strut brace and where u located??

djjones · Post by **djjones** » Thu Oct 13, 2011 9:29 am

all items located at kincumber, central coast
- if you can arrange courier for doors and bootlid i will send them but its not going to be cheap cos the doors weigh a ton
- there off cam's wreck so there not imperial red, there like a mettallic maroon
- not sure if brakes are front or back but you can see the other pair in the top pic still attached so you could probably figure it out from there
- the strut brace is 40mm across, $30, and about $15-$20 postage to vic
thanks

bass_twitch · Post by **bass_twitch** » Thu Oct 13, 2011 10:09 am

Holy crap that's a steal for a genuine rear strut

silverGPX · Post by **silverGPX** » Thu Oct 13, 2011 10:27 am

How are the struts? How much to brisbane 4121? and how much u want for them?

its_the_driver · Post by **its_the_driver** » Thu Oct 13, 2011 11:19 am

That strut brace is mine!! SOLD SOLD SOLD
Also the 2 brake calipers that are just by themselves.
Pricing for these? I'll most likely get these too.
Thank you.

djjones · Post by **djjones** » Thu Oct 13, 2011 1:08 pm

- the front struts are great, out of a gpvr, only 85 xxx kms on them
- the rears are out of my old one that had done 280 xxx kms so probably pretty worn
i dont really know what most of these things are worth, but im clearing it out cheap because i don't need it anymore
- 50 for the pair of front calipers
- 200 for the front struts
- 50 for the rears
all + postage
- and i'll pm you with payment details and you can give me your address after you tell me if you want the calipers or not

its_the_driver · Post by **its_the_driver** » Thu Oct 13, 2011 9:23 pm

Yeah sounds good, I wont beable to pay until next Tuesday though if that's not an issue due to big energy bills hahaha if thats ok then PM me payment info for the Rear Strut Brace and 2 Brake Calipers to 3977 Victoria. Thanks heaps

djjones · Post by **djjones** » Thu Oct 13, 2011 9:33 pm

yep all good. strut brace and brake calipers sold, tuesday is fine, i'll pm you

- front struts sold too

Taiwo · Post by **Taiwo** » Thu Oct 13, 2011 10:03 pm

how much for the radiator? u should hold on to it for me. trying to see if i need a new one. will check on the weekend

its_the_driver · Post by **its_the_driver** » Fri Oct 14, 2011 8:44 am

Sound's fantastic, Thank you

phi-tec · Post by **phi-tec** » Fri Oct 14, 2011 11:04 am

Yo djjones where u located? If it's the driver bails. Second dibs on rear strut!

fearme2 · Post by **fearme2** » Sat Oct 15, 2011 11:19 pm

Hey mate,

Ive sent you a PM.

Give me a buzz.

Thanks

its_the_driver · Post by **its_the_driver** » Mon Oct 17, 2011 3:40 am

Not bailing......Tis myne

FTO AUSTRALIA