LIMITED RUN: REVERSE INDIGLO DIALS
Moderators: IMC, Club Staff
- kmc
- Approved FTO Australia Trader
- Posts: 58
- jedwabna poszewka promocja
- Joined: Sun Feb 15, 2004 6:00 pm
- Location: UK
- Contact:
for all those interested here is a night time shot fitted to my dash. The blurred edges are infact reflections from my rings and aluminium cups. As you can see i've got some red leds behind it to try and make the needles more red. Gonna try a different led which will hopefully improve the looks. infact might even try super blue ones Please excuse the photoshot, my camera is not too good at night shots
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
-
- Mechanic
- Posts: 499
- Joined: Thu Aug 28, 2003 5:00 pm
- Location: Sydney
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- kmc
- Approved FTO Australia Trader
- Posts: 58
- Joined: Sun Feb 15, 2004 6:00 pm
- Location: UK
- Contact:
Hi, fitting instructions is roughly the same as this
http://www.kato.enterprise.btinternet.c ... tall3.html
except you do not need to remove the bulbs and it is also suggested you fit a 1 amp inline fuse into teh positive power supply.
These dials are actually easier to fit than the previous version.
The extension cable should be connected the the last inverter plug.
The center gauge to install is to move each needle to the 10-12 o'clock position and slip it on from there.
Hope this helps everybody.
http://www.kato.enterprise.btinternet.c ... tall3.html
except you do not need to remove the bulbs and it is also suggested you fit a 1 amp inline fuse into teh positive power supply.
These dials are actually easier to fit than the previous version.
The extension cable should be connected the the last inverter plug.
The center gauge to install is to move each needle to the 10-12 o'clock position and slip it on from there.
Hope this helps everybody.
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- Guni_GuGu
- Grease Monkey
- Posts: 264
- Joined: Fri Feb 20, 2004 6:00 pm
Damn, do you know, where i could even look at getting them custome made? Would KNC be able to make some?smorison wrote:no... they would have to be custom made... there aren't enough of these out there to cover the cost of mass production (on a small scale)Guni_GuGu wrote:Is there any chance of finding any dials even part of the whole kit, for my oil temp and vac gauges which are part of the center console?
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
- Guni_GuGu
- Grease Monkey
- Posts: 264
- Joined: Fri Feb 20, 2004 6:00 pm
Cool, thanks for that, do you have any idea, on the price, I would be looking at? Do you think, I can custome all the dials, is it worth it? Or should I only look at doing the oil temp and vac gauges?ruchi wrote:from memory emtech should be able to make you custom EL dials, I think they're in SA.
I'll give em a call, soon, but thanks again.
- smorison
- The Godfather
- Posts: 2461
- Joined: Sun Aug 04, 2002 5:00 pm
- Location: In the TRUCK!!!
- Contact:
depends on what you want...Guni_GuGu wrote:Cool, thanks for that, do you have any idea, on the price, I would be looking at? Do you think, I can custome all the dials, is it worth it? Or should I only look at doing the oil temp and vac gauges?ruchi wrote:from memory emtech should be able to make you custom EL dials, I think they're in SA.
I'll give em a call, soon, but thanks again.
if you like the current style then its probably best (and cheapest) to buy them and then ask emtech to make the others in the same style...
a one off they'll probably charge somewhere around 400-500 for