Rimz

Taz · Post by **Taz** » Thu Dec 15, 2011 2:56 pm

A solution to my front bar problem is to throw some bigger rims on the car, although this goes against my grain in doing so.
Not sure what the biggest rim is that fits on the FTO but i would be looking for some 18's i think would do the trick.
Not after any chrome at all, or dinner plates - something simple like a nice 5 spoke enkei design or something similar (chink's wheels are dead sexy as a reference)
Let us know if you have a spare set somewhere (doesnt have to have rubber on them my tyres are almost due for my style of driving anyway)
Would also have a set of black stocko's up for grabs also (so if your keen for a swap + cash even better)
Can pick up from brisbane
Cheers

Gholdwayne · Post by **Gholdwayne** » Thu Dec 15, 2011 3:15 pm

Taz wrote: Not after any chrome at all, or dinner plates

I like how you think sir

18's should be fine.. what suspension do you have? You might need to take some time deciding what tyre sizes to go for as the thing you will be most worried about is rubbing... Depending on the offset too, you might need to look at flattening the guards...

Taz · Post by **Taz** » Thu Dec 15, 2011 3:31 pm

dont have any front guards in right now, so rubbing wont really be a problem, have KYB's in right now - just after a half decent set of used 18's to have a quick fix on this problem, scrapes on bloody everything its ridiculous but it looks way to good to go back

Ill figure out all that once i can get a hold of some rims, ill work around them not the other way around i probably cant be too picky here i imagine

Eltnot · Post by **Eltnot** » Thu Dec 15, 2011 5:51 pm

So you're wanting to modify your suspension, change your odomoter, and buy new rims and tyres, instead of just raising the car back to it's original height?

Also why buy new rims when you can just buy bigger tyres? Not that it resolves your issue since you still would have to do all the other stuff.

Gholdwayne · Post by **Gholdwayne** » Thu Dec 15, 2011 10:49 pm

Sorry Taz, i meant flattening the guard part of the fender..

BearOnFire · Post by **BearOnFire** » Thu Dec 15, 2011 11:38 pm

Lip guarding i think it's called

neat fold when done by a professional.

Chiinkstarrh · Post by **Chiinkstarrh** » Thu Dec 15, 2011 11:50 pm

or simply just buy mine

Kustom · Post by **Kustom** » Fri Dec 16, 2011 12:18 am

Lol, Buying bigger rims, unless you want to pay a lot for an odd sized tire, you will be going down in profile size as well; thus, not even raising the car. Also, you said its 40mm to low? thats one and a half inches, so assuming your running stocks youd need to be running atleast a 19inch rim and keep the same profile to obtain that.

Eltnot · Post by **Eltnot** » Fri Dec 16, 2011 9:17 am

The simple solution here is to buy some stock shocks and struts and throw them in the car instead of your lowered setup.

Taz · Post by **Taz** » Fri Dec 16, 2011 10:15 am

Then the car would look like sh*t again, which would defeat the whole purpose of getting a new front bar in the first place (to make it look better)
Think i might just have to deal with the pigs/scraping till i can find some bigger rims

bass_twitch · Post by **bass_twitch** » Fri Dec 16, 2011 10:57 am

Taz wrote:Then the car would look like sh*t again, which would defeat the whole purpose of getting a new front bar in the first place (to make it look better)
Think i might just have to deal with the pigs/scraping till i can find some bigger rims

seriously dude it'd look rubbish with massive 19s and high profile tires anyway...
IMO, put some stock springs back in (or higher aftermarket ones) then give me your lowered springs :p

Taz · Post by **Taz** » Fri Dec 16, 2011 11:06 am

Pfft would never go 19's - they would be exceptionally clean 18's (with absolutely NO chrome or any dinner plate resemblance)
Not looking to raise it much, but just enough to not scrape on EVERYTHING, and maybe just a few bumps every now n then, maybe 20mm?
Just dont want to sacrifice the lowered look of the car, looks mint how it is now (if only there was no such thing as speed humps or driveways

)
Might just have to keep it how it is and walk my ass to places my car cant go...

Eltnot · Post by **Eltnot** » Fri Dec 16, 2011 11:14 am

Anything below 100mm is a defect. As a P plater in a sports car, you're already going to attract attention. You're giving the police a reason to bend you over that bumper and [Censored]. Also changing the diameter of your tyres requires an engineers cert I do believe. I know you're not allowed to change the size normally bar a small amount.

Taz · Post by **Taz** » Fri Dec 16, 2011 12:18 pm

I also have no spare tyre, my pod is illegal and numerous other things that is illegal with my car, im sure one more thing isnt going to be the straw that breaks, and i honestly couldnt care if it does - also cruzing around with no p plates on - and i must say i havent been looked at twice once, as soon as i put em back on i can guarantee within a week ill get raped.
I like my odds personally...

silverGPX · Post by **silverGPX** » Fri Dec 16, 2011 2:29 pm

bahahaha, im gonna go put kates rims on mine, and prove to you that you are unbelievably soft.

Kustom · Post by **Kustom** » Fri Dec 16, 2011 3:41 pm

Taz wrote:Pfft would never go 19's - they would be exceptionally clean 18's (with absolutely NO chrome or any dinner plate resemblance)
Not looking to raise it much, but just enough to not scrape on EVERYTHING, and maybe just a few bumps every now n then, maybe 20mm?
Just dont want to sacrifice the lowered look of the car, looks mint how it is now (if only there was no such thing as speed humps or driveways )
Might just have to keep it how it is and walk my ass to places my car cant go...

Re-read my post man your not gonna gain 20mm from changing 'rimz' just fuckn deal with it man & quit your complaining or raise your car. For fucks sake. Make a choice you can't have both if you can't do angles.

/thread

Taz · Post by **Taz** » Fri Dec 16, 2011 5:52 pm

Jesus rollerblading Christ Kustom, how bout you change that tampon and have another cigerrette you crazy bastard! (10 points if yoi get the reference)
Dunno what's up your ass but you should probably go see a proctologist it something.
Angle doesn't mean sh*t. its like trying to jump a kerb with a lowered car, no matter how much angle you put on it its going to scrape I honestly don't know why u can't understand that...

BearOnFire · Post by **BearOnFire** » Fri Dec 16, 2011 7:18 pm

Easy on mods. Cornering can be hazardous when going thru corners then hitting a bump while still in turning motion, the rubbing can impede the steering which leads to handling problems, tire shred. Dude, in the 90's (glory days of mods) many crashes are caused by bad tire rubbing, they dropped like flies in the wet.

Taz · Post by **Taz** » Fri Dec 16, 2011 10:07 pm

Your the level headed friend i never had.
Way to late for that now Bear, wont alarm you with some of the finer details but yea
Thanks for the safety advice anyway (i cant make this sound un-sarcastic

it really isnt)

BearOnFire · Post by **BearOnFire** » Fri Dec 16, 2011 10:46 pm

*look left/right* Me? wudda i say?

FTO AUSTRALIA

Rimz

Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Rimz

Re: Rimz

Re: Rimz

Re: Rimz

Re: Rimz