WTB: fto- brake prop valve

[Res]

hey guys sorry for no intro, i wont be around long, i just need 1 small part

after the brake prop valve from an fto with the 276mm front brakes (i think 3a not 2a's) (located on the firewall with the hard brake lines running into it)
looks like this



yeh if anyone is wrecking/ parting etc, and/or wants rid of it, let me know

(reason for not sticking round is i dont own an fto, just need the fto part for another car)

[Shane001]

If you're after the same as in the picture, I don't think that's from an FTO.

[spetz]

The picture is for reference only. It's not from an FTO.

Res, have a look through recent threads as I believe 1 or 2 members are wrecking cars (Bennoz comes to mind).
Alternatively, dstocks seems to be perpetually wrecking cars

[Shane001]

The picture is for reference only. It's not from an FTO.

Res, have a look through recent threads as I believe 1 or 2 members are wrecking cars (Bennoz comes to mind).
Alternatively, dstocks seems to be perpetually wrecking cars

Be aware there are 2 different types, the non ABS and ABS versions are different. Ben's wreck had the ABS version.

[spetz]

Thanks Shane I did not know that

[dstocks]

Ill probably have one or 2. Based on above info I would need to know which one (and how to tell difference if it isnt obvious)

[Shane001]

Hi Dwayne, yeah it is pretty obvious.

On the non ABS the lines from the master cylinder go into the front of it, then either side is front/rear left side & front/rear right side.

On the ABS version their is no connection into the front of it. I haven't had a real close look at the ABS version though to tell where what lines goes.

If I get a chance today I'll take a pic of the one I gutted (non ABS) and post it up.

[Res]

Ill probably have one or 2. Based on above info I would need to know which one (and how to tell difference if it isnt obvious)

yeh if you have a non-ABS one from an fto with twin pot fronts that would be great

also thanks for your help shane

[spetz]

Res I suggest taking pics etc and exchanging them with dstocks to confirm the lines are in the right place

[Res]

okay so finally got time to get pics
hope they are clear enuf, was very hard to get a good picture of it

[Shane001]

Yeah so that's a standard non ABS version

[Taz]

Youd think all FTOs would come standard with ABS