6a12 fto turbo kit for sale!!

fto-007 · Post by **fto-007** » Thu May 10, 2012 2:04 pm

Hi all up for sale is my turbo kit off my fto. Im sell the kit as i am upgrading to a larger turbo setup and no longer need this kit, to complete the turbo conversion you will need to buy and install intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines, relocate battery to boot, relocate o2 sensor. Other than that it should be good to go!

This turbo kit produced around 170kw at the wheels @ 12 psi bleeding off to 10 psi. The kit comes with evo injectors 560cc, fpr, rpw headers has nuts welded in for egt tuning, rpw y pipe modified to suit the turbo up pipe (2.5 inch), dump pipe with wastegate divider (2.5 inch), aem air filter with carbon fiber air box, kkr 330 turbo with turbo blanket (same bolt up as a garrett gt2860rs). My loss is your gain im selling all this for $2900 plus postage

fto-007 · Post by **fto-007** » Thu May 10, 2012 2:06 pm

couple of more pic

PHIL069 · Post by **PHIL069** » Thu May 10, 2012 2:20 pm

fto-007 wrote:need to buy and install intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines, relocate battery to boot, relocate o2 sensor.

You have set this up originally, I assume. Do you know approx how much $ the above list would cost.
Would the purchaser also have to rebuild/strenghten their upper engine ie: pistons, rings, valves, valve springs etc.
Would you be suppyling instructions for installation or help?

fto-007 · Post by **fto-007** » Thu May 10, 2012 2:36 pm

Its all a bolt on application i designed and made it at home, a local mechanic would be able to install it as its all bolted on. As for building the engine a stock engine can handle up to 6 psi maybe a little more with the right tuner. Yes i have had the setup on my car for about a year you can have a look at it on members rides i have a write up on it and some more pic

To buy new injectors + fpr $700, up and down pipes $ 1700, carbon fiber air box + filter $350, turbo + blanket $500, flanges ect $300.....so just off the top of my head would be around $3500

PHIL069 · Post by **PHIL069** » Thu May 10, 2012 2:41 pm

Sorry, I meant the cost of intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines

fto-007 · Post by **fto-007** » Thu May 10, 2012 2:46 pm

Just depends how cheap you want to do it. You could do it as cheap as $1000 for everything

veegeeta · Post by **veegeeta** » Thu May 31, 2012 7:46 pm

so how much more grunt would i get with this on a 6a13tt legnum if i was to go single turbo instead of my twin set up in my fto i think the headers are the same, do you still have ?

ps allready run 18 psi @220+kwts

fto-007 · Post by **fto-007** » Fri Jun 01, 2012 5:19 pm

hey yes i still have the kit

you are restricted by the turbo...a garrett gt2876r will bolt straight up, from memory they can produce around 260kw atw so i guess its just how much power your going for.

spetz · Post by **spetz** » Sat Jun 02, 2012 11:18 pm

Where did you get that carbon box from?
Good luck with sale

fto-007 · Post by **fto-007** » Sun Jun 03, 2012 12:58 am

Hi i made the carbon fiber air box myself a lot of work with carbon fiber work took around 15 hours to make

Website · Post by **Lawso** » Mon Jun 04, 2012 1:05 pm

so effing tempting!!!!!!!!!

wish i had money

fto-007 · Post by **fto-007** » Mon Jun 04, 2012 9:00 pm

it cost me around $9000 to turbo mine

that was with me making and designing everything

Daniel2019 · Post by **Daniel2019** » Tue Jun 05, 2012 12:15 am

lawso wrote:so effing tempting!!!!!!!!!

wish i had money

No man! Dont do it! Its too dangerous!

Post by **Vectose** » Tue Jun 05, 2012 12:18 am

Daniel2019 wrote:
lawso wrote:so effing tempting!!!!!!!!!

wish i had money
No man! Dont do it! Its too dangerous!

Yeah, you might drive over a speed bump and end up on your roof.

Daniel2019 · Post by **Daniel2019** » Tue Jun 05, 2012 12:54 am

Vectose wrote:
Daniel2019 wrote:
lawso wrote:so effing tempting!!!!!!!!!

wish i had money
No man! Dont do it! Its too dangerous!
Yeah, you might drive over a speed bump and end up on your roof.

Or someone elses

silverGPX · Post by **silverGPX** » Tue Jun 12, 2012 11:17 pm

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm......

Daniel2019 · Post by **Daniel2019** » Wed Jun 13, 2012 12:06 am

For the safety of everyone, can someone please buy this before lawso does..

Sahin · Post by **Sahin** » Wed Jun 13, 2012 4:03 am

Do it Matt!

silverGPX · Post by **silverGPX** » Sun Jun 24, 2012 2:24 pm

Will all of the piping clear the ABS unit?

fto-007 · Post by **fto-007** » Sun Jun 24, 2012 2:32 pm

yep clears all the ABS unit

FTO AUSTRALIA