wagonist wrote:Seems like an LSD is quite a common option for the FTO. Is this correct?
And how hard to find?
Is there any way to find out how different the FTO box is to the US spec Eclipse? Quaife sell brand new Torsen/Helical diffs for both the V6 FWD & front diff of the AWD turbo.
Some bright spark figured out that the latter one (ie front diff of the AWD box) fits the Hyundai Elantra box (which I've now fitted to my Excel).
I've still got the factory open diff of the Elantra at home to take some measurements if that'd help.
Its identical to the 3rd Gen Eclipse... which is also the same as a 3rd gen Magna.
Cheers.
I bought my Quaife out of California (when the A$ was a little better) for $1050 including postage & a speedo gear.
Out of the UK was a lot more expensive
Yeah the pound exchange rate has never been real good Mind you, was a lot worse a few years back! I remember buying bits for my Mini when it was 33p to the $1
Hi I'm new to the forum and "posting" in threads, ive been searching with no joy for 4 weeks now for a drivers side driveshaft for my Fto, I recently obtained a gearbox from eBay and installed it in my car, on re inserting the driveshafts I found it had an LSD installed (well at least a bar runnin through, visible from the passenger side easily) I was told to find out the gearbox code which is F5M42 2V7A1 AA3109 according to this page viewtopic.php?f=10&t=24245&hilit=gearbo ... d&start=20 the 2V7A1 shouldn't have an LSD, how can I obtain a driveshaft (I don't have the chassis number from the donor car of the gearbox) PEASE HELP ME my cars a gpx v6 manual 1995 fto
Correct, seeing that bar through the centre means it has a standard slip diff.
So the more common longer length stub axle will fit, however you'll need to determine what diametre version you need.
There were 2 types used, the 25 splines (26.6mm shaft dia) and the 27 spline (28.5mm shaft dia) which were seemingly used in any old box by Mitsubishi with no way of understanding which type were used in what box.
The box code tells us nothing about that.
So throw a set of vernier in the hole & we can go from there.
Really good mate. Its everything I wanted in a daily driver LSD, its like it's not there when you don't want it to be (ie tight turns & parking etc), but you know its there when you do need it (ie going for a flog.)
If I have any complaints, and they are very minor, it does make a soft 'clang' noise sometimes when you are at stop & release the clutch a bit too quickly (as the outer cylindrical gears slap into place) and it does punish the gearbox oil pretty badly. I'm changing it every 6-8k. Hardly big issues.
I was down at Meek the other day & he's now a big fan of them. Using them in all their street Evos now apparently. Front & rear.
Made by Koyo directly for Mitsubishi. No bearing supplier in the country can supply it, only Mitsubishi.
And guess how much they want for it locally??? $100. The same price as the whole kit from the US.
Having said that, if you only need one of the other ones, the local prices aren't too bad. Most of them are around the $25 mark.