What work did you do on your car today?

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
fraz91
Hair-do
Posts: 881
jedwabna poszewka promocja
Joined: Sun Jan 17, 2010 6:00 pm
Location: 4wding over you, Sydney

Re: What work did you do on your car today?

Post by fraz91 »

I suppose it kind of counts as today, although it wasn't my car.

Had to break into Alanah's (Lawso's GF) car because she had locked her keys in there. Took lawso to punchbowl maccas at 11pm, and he had the spare key. At least he thought he did, because when we tried it the damn thing wouldn't work.

Ended up using the tool-kit in the back of dad's beamer to pull the radio antenna out of the car, pry'd the top of the door open with a couple of spanners and bent the antenna so as to open the door. Flimsy antenna wouldn't unlock the door, but it would wind down the window so we could get our arms in.

Highlight of the night: wog-box full of "fuly hektiks" saying "hey, hey bro, can you teach me how to do that?" :lol:
I'll have an FTO one day... i swear!

until then:
1. 2001 Merc-Benz A160 (porta-loo on wheels)
2. 2007 Peugeot 307 TDi (more fun than you'd expect)
3. [url=ttp://ftoaustralia.com/v3/viewtopic.php?f=29&t=25373]2009 Mitsubishi Triton Di-D (a monster in its own right)[/url]
4. 1992 Nissan NX Coupe (club car and project car)
5. 1996 Holden SB Barina - "The Nugget"
6. 1996 Jeep XJ Cherokee Sport - The Budget Build
7. 2010 Toyota Landcruiser 76 Series - V8 Goodness... - Build coming soon.
8. 1990 Audi 90 manual - The delightfully dignified daily driver
Astron_Boy wrote:No correction needed Gen Y, you are correct.
Bennoz wrote:My rubbing happens on the inside.
Top
User avatar
Lawso
Penis Fingers
Posts: 2458
Joined: Sat Apr 05, 2008 5:00 pm
Location: Canberra
Contact:
Contact Lawso

Re: What work did you do on your car today?

Post by Lawso »

fraz91 wrote:I suppose it kind of counts as today, although it wasn't my car.

Had to break into Alanah's (Lawso's GF) car because she had locked her keys in there. Took lawso to punchbowl maccas at 11pm, and he had the spare key. At least he thought he did, because when we tried it the damn thing wouldn't work.

Ended up using the tool-kit in the back of dad's beamer to pull the radio antenna out of the car, pry'd the top of the door open with a couple of spanners and bent the antenna so as to open the door. Flimsy antenna wouldn't unlock the door, but it would wind down the window so we could get our arms in.

Highlight of the night: wog-box full of "fuly hektiks" saying "hey, hey bro, can you teach me how to do that?" :lol:
IT was glorious. now to boganise alanahs car and turn the bent antenna into something that vaguely resembles austraia
Image
Top
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: What work did you do on your car today?

Post by Taz »

Punchbowl ay? Did you say hi to Trent ? :cheeky:
Image
Bennoz wrote: Cum gunt it!
Top
User avatar
Technikhaus
Oldtimer
Posts: 3656
Joined: Wed Dec 28, 2011 4:45 pm
Location: Dunedin - NZ
Contact:
Contact Technikhaus

Re: What work did you do on your car today?

Post by Technikhaus »

Hahahah! that could have looked awkward :p
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Top
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: What work did you do on your car today?

Post by destinationtoby »

finally got around to putting in the new samco hoses and a coolant change.
and started to mount battery box ready for relocating
where does that little hose go?????
Attachments
image.jpg
image.jpg
image.jpg (189.97 KiB) Viewed 392 times
image.jpg
Top
User avatar
bjk
Totes
Posts: 5758
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: What work did you do on your car today?

Post by bjk »

IIRC it depends on the transmission of your car?? :?

Someone with actual mechanical knowledge chime in. :lol:
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
Top
User avatar
Vectose
Forum Moderator
Posts: 3952
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: What work did you do on your car today?

Post by Vectose »

It's for the power steering.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
Top
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: What work did you do on your car today?

Post by destinationtoby »

Vectose wrote:It's for the power steering.

Wasn't sure if it was that or not
Cheers
Top
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Contact dstocks

Re: What work did you do on your car today?

Post by dstocks »

And you will make a mess changing it over. Make sure you either catch the power steering fluid (as best you can) or have extra near by to replace.
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    Top
    User avatar
    rock_it
    Oldtimer
    Posts: 6599
    Joined: Sun Jun 10, 2007 5:00 pm
    Location: The Shire .. NSW
    Contact:
    Contact rock_it

    Re: What work did you do on your car today?

    Post by rock_it »

    Put in new front speakers
    Put in new central locking acruator on passenger side
    Installed new headunit..

    All in the wifes car..
    I just had to add it ......
    sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
    I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
    Astron_Boy wrote:Hold me Sooty, I need man comfort.
    :utbnb:
    Top
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: What work did you do on your car today?

    Post by silverGPX »

    Stripped flarenut on brakeline LOL
    Top
    User avatar
    PHIL069
    Oldtimer
    Posts: 4719
    Joined: Sun Sep 20, 2009 5:00 pm
    Location: Central Coast > South Australia

    Re: What work did you do on your car today?

    Post by PHIL069 »

    silverGPX wrote:Stripped flarenut on brakeline LOL
    Didn't you use a flare nut spanner?
    Try getting it undone with some vice grips.
    mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
    Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
    Top
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: What work did you do on your car today?

    Post by silverGPX »

    PHIL069 wrote:
    silverGPX wrote:Stripped flarenut on brakeline LOL
    Didn't you use a flare nut spanner?
    Try getting it undone with some vice grips.
    I got it off on the end.

    Started off with open ended spanner, pretty much fucked it.

    Then bought brake line spanners, was too far gone for them.

    Ended up using "Stillsons"
    Top
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: What work did you do on your car today?

    Post by silverGPX »

    i know have the correct spanners for all the other lines i gotta change lol
    Top
    User avatar
    destinationtoby
    Broke it
    Posts: 3503
    Joined: Sat Nov 24, 2012 11:05 pm
    Location: mid north coast

    Re: What work did you do on your car today?

    Post by destinationtoby »

    silverGPX wrote:i now have the correct spanners for all the other lines i gotta change lol

    :wink:
    Top
    User avatar
    Sahin
    HULK
    Posts: 5519
    Joined: Wed Oct 05, 2011 10:38 pm
    Location: Up to me nuts in boys guts

    Re: What work did you do on your car today?

    Post by Sahin »

    silverGPX wrote:Stripped flarenut on brakeline LOL
    Oh you dickhead! how'd you do that? may as well just part the car out now...
    Top
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: What work did you do on your car today?

    Post by silverGPX »

    Sahin wrote:
    silverGPX wrote:Stripped flarenut on brakeline LOL
    Oh you dickhead! how'd you do that? may as well just part the car out now...

    haha theres no blaming here, as I said I would of done it.

    But yeah might as well part it out, don't bother getting it fixed.

    I should sell it to you for 3k and you can scrap it, because its worthless now.
    Top
    User avatar
    fraz91
    Hair-do
    Posts: 881
    Joined: Sun Jan 17, 2010 6:00 pm
    Location: 4wding over you, Sydney

    Re: What work did you do on your car today?

    Post by fraz91 »

    Saturday: Punched a hole in the front diff cover. Pissed oil out along the track but got it back to campgrounds.
    Sunday: Pulled the bash-plates off. Have bent one, broken a weld and broken a cooling fin on the front diff cover, which tore the hole out. Fixed the hole with some metal-araldite equivalent. Filled with oil on the way home.
    Monday: Bending the bash-plates back into their original shape. Just have to wait for the new diff-cover to arrive.
    I'll have an FTO one day... i swear!

    until then:
    1. 2001 Merc-Benz A160 (porta-loo on wheels)
    2. 2007 Peugeot 307 TDi (more fun than you'd expect)
    3. [url=ttp://ftoaustralia.com/v3/viewtopic.php?f=29&t=25373]2009 Mitsubishi Triton Di-D (a monster in its own right)[/url]
    4. 1992 Nissan NX Coupe (club car and project car)
    5. 1996 Holden SB Barina - "The Nugget"
    6. 1996 Jeep XJ Cherokee Sport - The Budget Build
    7. 2010 Toyota Landcruiser 76 Series - V8 Goodness... - Build coming soon.
    8. 1990 Audi 90 manual - The delightfully dignified daily driver
    Astron_Boy wrote:No correction needed Gen Y, you are correct.
    Bennoz wrote:My rubbing happens on the inside.
    Top
    User avatar
    Astron_Boy
    Trolling Gen Y
    Posts: 8400
    Joined: Sun May 27, 2007 5:00 pm
    Location: Wine Country NSW
    Contact:
    Contact Astron_Boy

    Re: What work did you do on your car today?

    Post by Astron_Boy »

    fraz91 wrote:Saturday: Punched a hole in the front diff cover. Pissed oil out along the track but got it back to campgrounds.
    Sunday: Pulled the bash-plates off. Have bent one, broken a weld and broken a cooling fin on the front diff cover, which tore the hole out. Fixed the hole with some metal-araldite equivalent. Filled with oil on the way home.
    Monday: Bending the bash-plates back into their original shape. Just have to wait for the new diff-cover to arrive.
    Nice effort.
    Image
    Top
    User avatar
    Bennoz
    National President
    Posts: 23678
    Joined: Fri Jan 21, 2005 6:00 pm
    Location: Sydney
    Contact:
    Contact Bennoz

    Re: What work did you do on your car today?

    Post by Bennoz »

    fraz91 wrote:Punched
    fraz91 wrote: hole
    fraz91 wrote:Pissed
    fraz91 wrote:broken
    fraz91 wrote:Bending
    fraz91 wrote:tore
    fraz91 wrote:bash
    fraz91 wrote:araldite
    You are very much Lawso's mate :lol:

    :geny:
    Top
    Post Reply

    Return to “General Discussions”