This ^ and the fact that it would take longer and the edges are trickier. And actually, it would use a lot more material if it was done in one piece due to the wastage you would get from the pillars. I would have said $500 wasnt a bad price for it. Not as cheap as you might find, but cheaper than some. Price also depends on Material. Gloss costs more as do some of the other finishes.
This ^ and the fact that it would take longer and the edges are trickier. And actually, it would use a lot more material if it was done in one piece due to the wastage you would get from the pillars. I would have said $500 wasnt a bad price for it. Not as cheap as you might find, but cheaper than some. Price also depends on Material. Gloss costs more as do some of the other finishes.
kermut quoted around $400 but he' in melbourne, would use more fuel than the extra would be worth
Might be tempted to get someone to wrap the roof and pillars and then do the rest myself. That way I won't have to buy such a big roll for the rest of the parts and won't end up costing much more.
But to get a good join at the pillars, the best way would be to use Knife less tape and overlap the upper and lower sheets and then cut them both with the one piece of knifeless.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
But to get a good join at the pillars, the best way would be to use Knife less tape and overlap the upper and lower sheets and then cut them both with the one piece of knifeless.
Only if you use a cheap vinyl. It would peel more if you overlap one sheet over the other. If you do it with the Knifeless tape, it will be a perfect seam and they will be flat.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
They are the ones that sell the ~$600 rolls on eBay, although from their site it's much cheaper. You can get a gloss burnt orange 40ft x 5ft roll for $460 delivered!
Well,at this stage mine will happen week after next. If you can wait until its finished, I can arrange a group buy at a very good price (he's willing to discount). Will also get a price on materials if you wish to have a shot at it yourself. Just have to assess the quality.....