EOI - SN00R2 - Sold!
Moderators: IMC, Club Staff
- Bennoz
- National President
- Posts: 23668
- jedwabna poszewka promocja
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
EOI - SN00R2 - Sold!
Well, the club secretary has finally decided she needs a bigger car, so it looks like SN00R is up for sale!
A breif history; Originally purchased off Dwayne (dstocks) it was imported into Australia many years ago, but sat pranged in a panel shop in Canberra for years with a mere 19,000kms on the clock. In the 5 years we've had the car, it still only has 60,XXX genuine kms on it. It's only used as a weekend warior these days, as she also has a company car. It was originally an auto, but I converted it to a manual. It still has the factory floor mats, Jap rego sticker & original Japanese battery in her.
Mods
- 2.0L Mivec with 60,XXX genuine kms
- Full 2.5" stainless mandrel bent system from Hi Tech Muflers in Darlinghurst with custom 'down pipe' or 'Y pipe.
- UAS 4" whale dick intake pipe with 4" pod filter
- Fully rebuilt gearbox with all bearings replaced
- Ralliart Helical LSD
- Excedy MH7277 Heavy Duty clutch
- 18 x 8 Apache rims
- King Superlow springs
- KYB shocks
- Front strut brace
- Full SuperPro poly bush kit (Anti lift variant)
- Bendix Heavy Duty front brake pads
- Blue Samco hose kit
- Momo Steering wheel
- Wood grain interior
- Chrome dial rings
- Fully resprayed silver with a light purple pearl
The Bad
- Clunk coming from the drivers side - I've torn my hair out looking for it, replaced every component I can think of & I still haven't found it. I'm thinking now it's either the shock or the swaybar mount.
- Rust patch (not the normal roof rust) just the one spot above the drivers door sill. Looks like it was due to bad prep work before the respray.
- Woodgrain centre console has a a crack in it. Just the one.
Would love to see it go to a club member, especially as it covered in club stickers I've serviced & maintained it all it's life, so she's had regular oil changes etc. Cam belt has not been done because it doesn't need it yet!
We are after $7000 ono.
There's more pics & her history here: viewtopic.php?f=41&t=24219
This pic is a little bit old. Pre manual conversion & steering wheel, mainly to show the woodgrain.
A breif history; Originally purchased off Dwayne (dstocks) it was imported into Australia many years ago, but sat pranged in a panel shop in Canberra for years with a mere 19,000kms on the clock. In the 5 years we've had the car, it still only has 60,XXX genuine kms on it. It's only used as a weekend warior these days, as she also has a company car. It was originally an auto, but I converted it to a manual. It still has the factory floor mats, Jap rego sticker & original Japanese battery in her.
Mods
- 2.0L Mivec with 60,XXX genuine kms
- Full 2.5" stainless mandrel bent system from Hi Tech Muflers in Darlinghurst with custom 'down pipe' or 'Y pipe.
- UAS 4" whale dick intake pipe with 4" pod filter
- Fully rebuilt gearbox with all bearings replaced
- Ralliart Helical LSD
- Excedy MH7277 Heavy Duty clutch
- 18 x 8 Apache rims
- King Superlow springs
- KYB shocks
- Front strut brace
- Full SuperPro poly bush kit (Anti lift variant)
- Bendix Heavy Duty front brake pads
- Blue Samco hose kit
- Momo Steering wheel
- Wood grain interior
- Chrome dial rings
- Fully resprayed silver with a light purple pearl
The Bad
- Clunk coming from the drivers side - I've torn my hair out looking for it, replaced every component I can think of & I still haven't found it. I'm thinking now it's either the shock or the swaybar mount.
- Rust patch (not the normal roof rust) just the one spot above the drivers door sill. Looks like it was due to bad prep work before the respray.
- Woodgrain centre console has a a crack in it. Just the one.
Would love to see it go to a club member, especially as it covered in club stickers I've serviced & maintained it all it's life, so she's had regular oil changes etc. Cam belt has not been done because it doesn't need it yet!
We are after $7000 ono.
There's more pics & her history here: viewtopic.php?f=41&t=24219
This pic is a little bit old. Pre manual conversion & steering wheel, mainly to show the woodgrain.
- bjk
- Totes
- Posts: 5748
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: EOI - SN00R2
inb4 "I'll take the UAS pipe"
But I will.
But I will.
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: EOI - SN00R2
Nooo not SN00R2!
Smurfy is having an inspection today mate so if you wanna swap those bottom rad pipes now would be the time...
As in tomorrow
GLWS Kaz + Bennoz!
Smurfy is having an inspection today mate so if you wanna swap those bottom rad pipes now would be the time...
As in tomorrow
GLWS Kaz + Bennoz!
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- yotka
- Mechanic
- Posts: 426
- Joined: Sat Apr 03, 2010 5:00 pm
- Location: Perth
- Contact:
Re: EOI - SN00R2
Will it have trouble clearing the pits in WA, with its present form?
example: Does a manual conversion require an Engineer's Cert?
example: Does a manual conversion require an Engineer's Cert?
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: EOI - SN00R2
Shouldn't be a problem. They probably won't even notice.yotka wrote:Will it have trouble clearing the pits in WA, with its present form?
example: Does a manual conversion require an Engineer's Cert?
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: EOI - SN00R2
I very much doubt it. As said above, they wouldnt know and even if they did, its a straight bolt in - nothing to engineer
This one would be a good pickup. Still had the new car smell when I sold it.
This one would be a good pickup. Still had the new car smell when I sold it.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: EOI - SN00R2
Now it just smells like pot
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: EOI - SN00R2
Make sure you clean up the maccas straws from under the seats!
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: EOI - SN00R2
Bump!
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: EOI - SN00R2 - Sold!
SOLD!
Car is well & truly staying in the club, now on finance to Step Son No#2
Car is well & truly staying in the club, now on finance to Step Son No#2
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: EOI - SN00R2 - Sold!
Can you find a family member to buy bobby??
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.