For the engine to run you need the following sensors communicating with the ECU so the ECU can send the correct signals to the injectors, it's called the Engine Control System.
-TPS = A-07
-Atmospheric Pressue sensor = A-05
-Variable Induction Control Servo = A-02
-Idle Speed Control Servo = A-09
-Engine Coolant Temp Sensor = A-75
-Intake Air Temp Sensor = A-04
-Oxygen Sensor = B-68
-Camshaft Position Sensor = A-90
-Crank Angle Sensor = A-91
-Detonation Sensor = A-19
You also have to have an operating Engine Control Relay.
Possable Causes...
Injectors not timed correctly, maybe you have the injector harness pluged in to the wrong injectors.
or
You have the IFS and TPS harness's pluged in backwards, they are the only 2 plugs that are identical although the wire colours are different.
The TPS harness wiring should be...
1-Black
2-Yellow/Blue Stripe
3-Red/White Stripe
4-Green/Yellow Stripe
or
You have a stuffed sensor
or
You don't have all the sensor pluged in correctly.
This might help...
Use the list of numbers above to locate sensors/harness.
Engine Harness 01.jpg
Engine Harness 02.jpg
Engine Harness 03.jpg
Engine Harness 04.jpg
You do not have the required permissions to view the files attached to this post.