WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Moderators: IMC, Club Staff
- spetz
- Oldtimer
- Posts: 2915
- jedwabna poszewka promocja
- Joined: Wed Mar 03, 2004 6:00 pm
WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Hi everyone,
I am searching for the below items:
1. Factory MIVEC airbox, including clips, bolts and the tiny bit of piping right before the airbox.
I have an Apexi Power Intake in decent but used condition with adapter to fit the MIVEC intake pipe and a small bracket to hold it in place (fits Lancer with FTO conversion. The bracket may not bolt onto the FTO chassis) that I would ideally swap with, otherwise PM to negotiate a price.
Picture of what I am looking for:
2. An ignition coil for the front bank of cylinders from the MIVEC motor in good condition, ideally including the bolts that secure it to the rocker cover. Please PM to negotiate on price.
Picture of what I am looking for:
3. The two rods and bracket that clamp the battery down, including all bolts etc
Picture of what I am looking for:
Located in Melbourne.
I am searching for the below items:
1. Factory MIVEC airbox, including clips, bolts and the tiny bit of piping right before the airbox.
I have an Apexi Power Intake in decent but used condition with adapter to fit the MIVEC intake pipe and a small bracket to hold it in place (fits Lancer with FTO conversion. The bracket may not bolt onto the FTO chassis) that I would ideally swap with, otherwise PM to negotiate a price.
Picture of what I am looking for:
2. An ignition coil for the front bank of cylinders from the MIVEC motor in good condition, ideally including the bolts that secure it to the rocker cover. Please PM to negotiate on price.
Picture of what I am looking for:
3. The two rods and bracket that clamp the battery down, including all bolts etc
Picture of what I am looking for:
Located in Melbourne.
- Supplanter
- Forum Moderator
- Posts: 6417
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
I probably have the airbox parts, minus the bolts. I'll check the garage tomorrow. I am in Melbourne
LED ALL the things.
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
That would be great, what part of Melbourne are you from?
- Supplanter
- Forum Moderator
- Posts: 6417
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
I have:
I am based near Dandenong, but travel a lot for work.
I am based near Dandenong, but travel a lot for work.
LED ALL the things.
- yotka
- Mechanic
- Posts: 426
- Joined: Sat Apr 03, 2010 5:00 pm
- Location: Perth
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
I might have number 3.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Ive got everything except the airbox
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Supplanter and dstocks, I'll send you a PM
Yotka, thanks for the offer, if dstocks doesn't have the battery clamps I'll let you know
Yotka, thanks for the offer, if dstocks doesn't have the battery clamps I'll let you know
- yotka
- Mechanic
- Posts: 426
- Joined: Sat Apr 03, 2010 5:00 pm
- Location: Perth
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
No worries.
I got mine off Dstocks actually, way back, but never used it.
Didn't fit for some reason, so ended getting a universal type which fitted perfectly.
I got mine off Dstocks actually, way back, but never used it.
Didn't fit for some reason, so ended getting a universal type which fitted perfectly.
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Hi everyone,
Still looking for the airbox if anyone has one?
Preferably Melbourne.
Also just realized that I put this thread in the wrong section. Admins can you please move it to the wanted to buy section?
Still looking for the airbox if anyone has one?
Preferably Melbourne.
Also just realized that I put this thread in the wrong section. Admins can you please move it to the wanted to buy section?
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Bump.
Looking for a stock airbox if anyone has one
Looking for a stock airbox if anyone has one
- Supplanter
- Forum Moderator
- Posts: 6417
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Sorry, been flat out with work. I still have mine available.
LED ALL the things.
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
Bump.
Still looking for an airbox guys.
Still looking for an airbox guys.
- bjk
- Totes
- Posts: 5748
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
spetz wrote:Bump.
Still looking for an airbox guys.
?Supplanter wrote:
Sorry, been flat out with work. I still have mine available.
-
- Grease Monkey
- Posts: 182
- Joined: Sat Sep 21, 2013 9:35 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
I got airbox here..pm me an offer?
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: WANTED: MIVEC Airbox, Ignition Coil, Battery Clamps
He doesn't respond to my private messages. Far too unreliable to deal with.bjk wrote:spetz wrote:Bump.
Still looking for an airbox guys.?Supplanter wrote:
Sorry, been flat out with work. I still have mine available.
evo-gsr, I've sent you a PM
-
- Grease Monkey
- Posts: 182
- Joined: Sat Sep 21, 2013 9:35 pm