So I changed the oil today, went from Penrite 10w40 (full snyth) to Castrol 10w40 (semi synth) and changed the Ryco filter to the same filter and now have a rattle coming from around the start area, any ideas?
Pop the rubber boot that goes over the clutch fork on the gearbox and have a look to see if any loose bolts in the bell housing. Also while driving do some hard left turns and see if the rattle comes back in the turn.
silverGPX wrote:Pop the rubber boot that goes over the clutch fork on the gearbox and have a look to see if any loose bolts in the bell housing. Also while driving do some hard left turns and see if the rattle comes back in the turn.
Only rattles at idle, nothin while turning.
I suspect it is crank pulley, gonna take off and see how fucked keyway is...
Well I had a bit of a torn power steering belt which was rattling/slapping like crazy after a day at the track. Changed that out and seemingly no rattle now, fingers crossed thats all it was.