Got a problem with your FTO? ask about it here
Moderators: IMC , Club Staff
jakey106
Mechanic
Posts: 687 jedwabna poszewka promocja
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT
Post
by jakey106 » Thu Aug 03, 2006 1:40 pm
I turned up to the gym today and found collant was on the ground i lifted up the bonnet and there was a pipe leading into the fire wall and right at the join it was steaming and leaking coolant i tryed to see if i could tighten up the pipe see if that would help but no luck does any one know what can be the cause of it overheating?
Bennoz
National President
Posts: 23678 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Aug 03, 2006 1:47 pm
Sounds like the line that runs into the heater matrix... Is there any coolant in the floor of the car?
jakey106
Mechanic
Posts: 687 Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT
Post
by jakey106 » Thu Aug 03, 2006 1:50 pm
hmm i dont think so i didnt notice any. If its easier i have wirless on my lap top i can take my laptop to my car and if you got any ideas what it can be i can check it out right away and get back to ya
Rocco
Grease Monkey
Posts: 385 Joined: Sun Nov 20, 2005 6:00 pm
Location: Sydney
Post
by Rocco » Thu Aug 03, 2006 1:56 pm
feel the floor on the passenger side
FTO-279
jakey106
Mechanic
Posts: 687 Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT
Post
by jakey106 » Thu Aug 03, 2006 2:06 pm
nope its dry. i have taken a picture of the pipe if that makes it easier for you. whats the best way to send it?
Bennoz
National President
Posts: 23678 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Aug 03, 2006 2:12 pm
Upload the pic to
www.imageshack.us , then copy the 'direct link to image' and past it in a post - surround the link with tags.
Example:
and we will all be able to see it.
jakey106
Mechanic
Posts: 687 Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT
Post
by jakey106 » Thu Aug 03, 2006 2:20 pm
Its leaking right at the end the pipe doesne seem split.
Bennoz
National President
Posts: 23678 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Aug 03, 2006 3:12 pm
Well I'd say nip up the hose clamp, but if your overheating and that pipe is leaking, it sounds like you might have a blockage somewhere.
Feeling keen to try a cooling system flush?
jakey106
Mechanic
Posts: 687 Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT
Post
by jakey106 » Thu Aug 03, 2006 3:16 pm
im up for anything if i have the right tools. But the only problem is i dont know how to do it is it in the DIY section?