Over heating

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
jakey106
Mechanic
Posts: 687
jedwabna poszewka promocja
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Over heating

Post by jakey106 »

I turned up to the gym today and found collant was on the ground i lifted up the bonnet and there was a pipe leading into the fire wall and right at the join it was steaming and leaking coolant i tryed to see if i could tighten up the pipe see if that would help but no luck does any one know what can be the cause of it overheating?
User avatar
Bennoz
National President
Posts: 23678
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Sounds like the line that runs into the heater matrix... Is there any coolant in the floor of the car?
User avatar
jakey106
Mechanic
Posts: 687
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Post by jakey106 »

hmm i dont think so i didnt notice any. If its easier i have wirless on my lap top i can take my laptop to my car and if you got any ideas what it can be i can check it out right away and get back to ya
Rocco
Grease Monkey
Posts: 385
Joined: Sun Nov 20, 2005 6:00 pm
Location: Sydney

Post by Rocco »

feel the floor on the passenger side
FTO-279
User avatar
jakey106
Mechanic
Posts: 687
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Post by jakey106 »

nope its dry. i have taken a picture of the pipe if that makes it easier for you. whats the best way to send it?
User avatar
Bennoz
National President
Posts: 23678
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Upload the pic to www.imageshack.us, then copy the 'direct link to image' and past it in a post - surround the link with tags.

Example: Image and we will all be able to see it.
User avatar
jakey106
Mechanic
Posts: 687
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Post by jakey106 »

Its leaking right at the end the pipe doesne seem split.
Image
User avatar
Bennoz
National President
Posts: 23678
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Well I'd say nip up the hose clamp, but if your overheating and that pipe is leaking, it sounds like you might have a blockage somewhere.

Feeling keen to try a cooling system flush?
User avatar
jakey106
Mechanic
Posts: 687
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Post by jakey106 »

im up for anything if i have the right tools. But the only problem is i dont know how to do it is it in the DIY section?
Post Reply