FTO AUSTRALIA

6A12 MIVEC engine for sale with:
-Ported, polished and match ported fully serviced heads including 3 angle valve cut
-Match ported & polished intake manifold with high flowed 65mm Magna TB and phenolic gaskets for manifold and TB
-Block o-ring and honed, stock internals balanced to within 0.25 grams
-Brand new RPW HPC coated extractors
-FSE FPR
-11:1 Compression ratio with adjustable cam gears
-New water and oil pump, new rings, bearings, seals, gaskets etc
-Possibly come with Daiken HD clutch, 20,000km on it
-GReddy blue E-manage with injector and ignition harness
-210cc injectors

Price not finalised but roughly $4000 including a workshop fitting it + exchange for your old MIVEC engine

sounds like a nice set up.

how many k's are on it if its not fresh?

any power figures?

Hasn't been started yet
Not completely assembled at the moment
Power figures I was hoping around the 140-150kw atw mark

thats a good deal.

and if it makes that power it will have some go too.

all the best with the sale

Confirmed, clutch will come with the engine

Spetz, i've decided to do a conversion on the lancer. Be it 4g93t or 6a12. Do you HAVE to have a mivec to swap with?

hmmm don't HAVE to but the price would go up

Keep in mind Liquidity to do the swap it would be much easier to get a half cut so you could give me that engine
And if it makes it even easier find a cheap half cut would a busted engine as I don't care what condition the other engine is in

Damn with you doing the engine conversion we might have a repeat of those previous discussions

Damn! I have the 'busted engine' as you put it - sitting in the garage (albeit the basic block) but no $4000 to spend....shame

Why hello mrx.

damn spetz,????????? your selling your new engine now?????! what the why?!!!!! your getting a k24 eg or something?

Actually no it seems like it's not for sale anymore

I was doing calculations and I would be able to afford the 2.5L MIVEC RPW engine.

HOWEVER, I called RPW and the $10,000 asking price does NOT include cams, extractors, ECU or the clutch as it was advertised on the website.
As everyone knows cams alone are $2500 which is really blowing this out of reach

I told Dave that seeing as he doesn't expect to sell it, I will offer him 10K as advertised. He will let me know in 2 weeks but seems doubtfull as he said he is not all that keen on selling it as he is using it in a circuit FTO he is planning on building

And Droidy! Come on, you know it's EM1 all the way for me!

mmmmm... Honda.... *DROOOOOL*

that sounds like about the level of customer service people have come to expect from rpw

Well I told Dave that if he can sell me the engine as advertised for the advertised price I would buy it
I find out in 2 weeks whether I will have a 12 second all motor lancer or not

hell yeah get the 2.5!!!!!!!!!!!!!! Far they should sell it to you- no one else is buying it.

Yeah but Dave said he doesn't care if he doesn't sell it as he will use it on his own built for circuit FTO

False advertising unfortunately



Anyone interested in this engine???

Do you have any pictures??

Best I have:










I have some of the bare block too if you are interested but they don't really show anything
SOrry about quality, it's all on phone camera

Bump

Is anyone seriously interested in this?
I need to know so I can start taking the appropriate actions if this isn't the motor going into my car

Is this engine still available, I'm in the market for a new engine and gear box etc.

Two questions, for the price in the intial post, where does the installation need to be done.

Also I've got at GR engine, how will that effect the price.

Regards Marty

The engine is still available
No gearbox though, and does not include the MIVEC ECU which you would need
Also, it would be swapped in Yennora Sydney
Unsure how the price would change if your engine isn't MIVEC

I can find out more info for you if you are serious, including extra cost of converting from non MIVEC to MIVEC
Also, the engine is not assembled yet, which means if you want any more mods done all you need to pay is mods
ie, forged pistons, rods, cryo crank, just need to pay for those parts and no labour