Creeking noise when i accelerate and brake and also shuders

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
jakey106
Mechanic
Posts: 687
jedwabna poszewka promocja
Joined: Mon Jul 17, 2006 5:00 pm
Location: Canberra ACT

Creeking noise when i accelerate and brake and also shuders

Post by jakey106 »

Hey guys the creeking noise i get only happens when i accelerate or brake and i took it to my mechanic and he recons its the engine mounts could this be possible? Also ive noticed that when i am parking somtimes the car shudders dont know what that is either could i possibly need to check the timing?
User avatar
FtoSam
Oldtimer
Posts: 3924
Joined: Wed Jul 13, 2005 5:00 pm
Location: Brisbane West
Contact:

Post by FtoSam »

I has the exact same thing in mine when i first got it... if u accelerate it only does it once... then when u brake as u start to slow it does it again?

Like a ball rolling in a tube?


It was some linkages or something in the front suspension... cost about $100 or something for him to fix it.
Image

If you need good deal on photography, let me know.
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Post by mr-charisma »

I am having a similar problem when coming to a complete stop, or as soon as I let my foot off the brake, but it is more of a 'rubbing' sound with a bit of a creaking & there is a shudder. It started happening just after I replaced the brake pads, I am guessing because I didn't bother with machining the discs...

I have been told to take off my brake pads again & lightly rub them on some concrete to roughen them up a bit & then put them back on... just haven't had time / been bothered to do it yet, hasn't been such a major deal (It is kinda embarrassing when I rock up to the lights and my car is making these nasty noises though)
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

Engine mounts

Post by dstocks »

Engine mounts will definitely make that noise if they have had it. Had one go on mine last year. You can generally tell with 2 people by having one stand on the brake while tapping the accellerator and the other watching the engine for movement. The engine should not move much, but if a broken mount, the torque will cause it to lift. On mine, one of the rear mounts let go and when you gave the accellerator a sharp tap, the back of the engine would lift about an inch.
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    User avatar
    jakey106
    Mechanic
    Posts: 687
    Joined: Mon Jul 17, 2006 5:00 pm
    Location: Canberra ACT

    Post by jakey106 »

    lol think its the engine mounts according to the mechanic somone stuck some rubber hose under it or somshit and i need new engine mounts but he is having trouble finding the part cause the mistubishi dealer here is sh*t
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    Desperate

    Post by dstocks »

    If you get desperate, I have some (havent had a close look at them though). I got mine reconditioned by UAS. Dont know if they still do it anymore though
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      Post Reply