What work did you do on your car today?

[Daniel2019]

Did a sneaky one the other day and signed over the Mazda to Kaylah without her even knowing

Cleaned it just then, gave it a wash and as I was driving it to dry it off it started raining She probably wont notice it but eh!

Also got a shiny new key cut and engraved for it. Now it just needs a bow around it and its ready to be handed over!

Im quite proud of myself

[Technikhaus]

pix of it with the bow!!

[PHIL069]

.....and engraved for it.

I could have done that part

Good luck with the hand over

[Daniel2019]

Successful handover of the car!

Didnt get a proper photo with the bow as it had crappy lighting when I put it on. Was just a red bow around the base of the antennae. I wanted to put a bow around the whole thing like a present but didnt get around to buying one that big.

@Phil - It actually occurred to me today that you couldve done it + a little plate to put on the passenger side dash or something saying Happy 18th and such

All in all, everyone's happy!

[Vectose]

Good stuff Daniel.


I wired up my new folding mirrors to fold in when locked and fold out when unlocked.

[shadowarrior]

Good stuff Daniel.


I wired up my new folding mirrors to fold in when locked and fold out when unlocked.

nice!
Is the wiring work tricky? (along with auto rolling up the mirrors?)

[Vectose]

The auto folding mirrors aren't hard to wire up, you just need a couple of relays wired up to send a 12v unlock and lock signal from the central locking to the mirror wires. I also installed a switch to disable the auto folding when I don't want them to fold in.

[Supplanter]

http://www.vikash.info/fto/auto_mirror/

[Technikhaus]

When I re-wire my alarm (maybe) I want to do that to my mirrors
I already have the auto windows, so maybe...

[shadowarrior]

Changed fuel filter
Changed oil and oil filter
Changed gearbox oil
Put on the DBA Xdrilled rotors and EBC Redstuff pads.
Picked up the same wing which Aza has

Sahin did most (all) of the work while I took care of Health and Safety management, un-hooking and hooking up batteries, precise oil filling without any sort of funnel, stealing Sahin's UAS pipe (unsuccessful )

Now it drives smooth, gear shifts smooth, brakes hard

[silverGPX]

Drained my cooling system and threw my radiator in the bin.

[Technikhaus]

I hope you put a new one in to replace it????

:p

[silverGPX]

I hope you put a new one in to replace it????

:p

Nope lol.

I'll get it in January. I mainly wanted it out cos it was filled with water as well as the rest of the system and it would just be sittin there building up rust etc.

[shadowarrior]

Topped up Dot4 brake fluid

[kiz]

I hope you put a new one in to replace it????

:p

You don't need a radiator

we'll put it down as 'Weight Reduction'

[silverGPX]

Looking at a Cusco Rollcage

[Technikhaus]

Looking at a Cusco Rollcage

Is this action going to progress any further from just looking?

[silverGPX]

Hopefully.

Its not too expensive.

I pay off the rest of my CF bonnet in Jan and then I was looking at brakes and a rollcage

[Taz]

Looking at a Cusco Rollcage

Its not too expensive.

[silverGPX]

when funds allow