changing rear gasket, spark plugs and oil sump.

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

User avatar
destinationtoby
Broke it
Posts: 3503
jedwabna poszewka promocja
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

in the process of changing the rear gasket. dont need help as of yet, but probably will at some stage lol
doing the gasket first- noticed its really dirty under the cover, mainly on the left side. gave it abit of a clean with just a rag but i want to know if theres a better way to cleAn it up with out damaging something? also im changing the oil and putting on a new sump after ive done this, so would it be safe to degrease and scrub all the gunk (photos) off with it all flushing out with the old oil when i do the change? or just no!
and these bolts are from the throttle body. why is only one of them covered in a white corrosive looking powder , mean anything?
Attachments
image.jpg
image.jpg
wiped it down.<br />is it burnt oil?
wiped it down.
is it burnt oil?
image.jpg
User avatar
Bennoz
National President
Posts: 23678
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by Bennoz »

Just a bit of oxidation, nothing to worry about.

That oil gunk though is disgusting. Indicative of a poor service history before you.

I'd be giving that full on diesel flush mate, a rag wont cure that.
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Bennoz wrote:I'd be giving that full on diesel flush mate, a rag wont cure that.


Ok thought so..
But the question mainly is, will anything that I put through there to clean it, fall straight thru and come out when I drop the sump out? Including the bits of oil build up and sh*t? And is degreaser safe to use? And of course after doing this I'd run a litre of clean oil all thru it before putting the sump back on and filling up.
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: changing rear gasket, spark plugs and oil sump.

Post by silverGPX »

I think this calls for a fresh diesel oil+seafoam limiter bash
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by Daniel2019 »

That's what diesel oil flush is for mate, as Ben said. We did it on a Land Cruiser at work that had oil like mud (literally) and hadn't had new oil in 50,000ks 8O

Fixed it pretty good 8)
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

I don't have that though? And I need to put the gasket back on tonight. I just want to no is it safe to degrease? If its not then I just have to leave it as is..
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

I cleaned the top
Attachments
image.jpg
image.jpg
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Before

After
Attachments
image.jpg
image.jpg
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by Daniel2019 »

I wouldn't degrease it. My guess is that it wouldnt be safe and you couldn't guarantee you'd get all the degreaser out again, but I could be wrong.

Edit: That rocker cover looks great now 8)
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
Vectose
Forum Moderator
Posts: 3952
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: changing rear gasket, spark plugs and oil sump.

Post by Vectose »

You do the flush just like you would an oil change. You pour it into your old oil, run it for a bit/drive around in the low rev range then dump it out and pour in new oil.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by Astron_Boy »

Vectose wrote:You do the flush just like you would an oil change. You pour it into your old oil, run it for a bit/drive around in the low rev range then dump it out and pour in new oil.
In this case, I'd be doing it twice.
Get some cheap oil after the first flush is done, and run more cleaner through.
Dump it, then put in the good oil!

A bit unnecessary, but ehh...
Image
User avatar
Vectose
Forum Moderator
Posts: 3952
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: changing rear gasket, spark plugs and oil sump.

Post by Vectose »

Or you could do oil changes more frequently and run a flush through each time, like every 3000km's.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by Astron_Boy »

Yeah, but in this initial case as there is a lot a grime there.
Image
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Vectose wrote:You do the flush just like you would an oil change. You pour it into your old oil, run it for a bit/drive around in the low rev range then dump it out and pour in new oil.

Ok I see. So I can do the gasket and put everything back on. Then before I put in the new $80 thing of oil flush it with dielsel, then again maybe with a cheap oil. Then fill with the good stuff?
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

I've changed oil and filter EVERY 8000 - 10 000kms and have never used anything other then this v
V
Attachments
image.jpg
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
Vectose
Forum Moderator
Posts: 3952
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: changing rear gasket, spark plugs and oil sump.

Post by Vectose »

I've got 5 bottles of that on the shelf. Stocked up when they were on sale for $40 at Super Cheap.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Vectose wrote:I've got 5 bottles of that on the shelf. Stocked up when they were on sale for $40 at Super Cheap.
$40 fark thats cheap



The back spark plugs. Quite dirty... I remember seeing someone post a spark plug chart with pictures showing what means what.. Does anyone have this?
Attachments
image.jpg
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Wow can't believe it took like all day to get this done.
Back together now, and holy F#%K ! The noticeable difference in power, sound and smoothness is incredible. What was wrong with the car before? Possibly not running on all the spark plugs or something? They haven't been changed since the week I bought the car. Like 9 months or so ago. But still, the difference is crazy.

Can't wait to throw in the new sump and some fresh oil tomoro. Also doing the transmission oil and filter aswell.
Attachments
image.jpg
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
yotka
Mechanic
Posts: 426
Joined: Sat Apr 03, 2010 5:00 pm
Location: Perth
Contact:

Re: changing rear gasket, spark plugs and oil sump.

Post by yotka »

:lol:

Totally understand the feeling.
Done similiar stuff about 3 years ago(by a professional though).
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: changing rear gasket, spark plugs and oil sump.

Post by destinationtoby »

Went to do the oil this morning. And I found this ! Wtf
There was no sign of any water before I did the gasket and plugs last night. Then I took it for a drive for about 10mins. And this is the result.

I'm guessing its water left in the rocker cover after I decreased it and scrubbed then hosed the shift out of it. Possibly could of held water somewhere that I didn't notice ? Does this sound most probable ?

Or could I have put a hose back on the wrong connection when reconnecting the manifold.

and is it likely to do damage to the engine if it was just abit of water left in there from cleaning out?
Attachments
image.jpg
Post Reply